Add seat name to client-connected event

Remove unnecessary copying when listing clients
Iterate over clients instead of listing
2023-03-27 21:19:23 +00:00 · 2023-03-25 13:08:15 +00:00 · 2023-03-25 12:57:24 +00:00 · 2023-03-25 10:33:16 +00:00 · 2023-03-25 10:30:31 +00:00 · 2023-03-23 22:04:05 +00:00
38 changed files with 303 additions and 2215 deletions
--- a/.builds/archlinux.yml
+++ b/.builds/archlinux.yml
@ -14,7 +14,6 @@ packages:
  - sway
  - jq
  - lsof
-  - python-pycryptodomex # needed by vncdotool
  - vncdotool

 sources:
--- a/.github/ISSUE_TEMPLATE/bug_report.md
+++ b/.github/ISSUE_TEMPLATE/bug_report.md
@ -6,11 +6,10 @@ labels: 'bug'
 ---

 ### Useful information:
-Please, try to gather as much of useful information as possible and follow
-these instructions:
+Please, try to gather as much of useful information as possible.

 - **Version:**
-  - Run this command: `wayvnc -V`
+  - `wayvnc -V`

 - Try to reproduce while capturing a **trace log:**
  - `wayvnc -Ltrace | tee wayvnc-crash.log`
--- a/.gitignore
+++ b/.gitignore
@ -7,4 +7,3 @@ perf.*
 *.pem
 .vimrc
 .cache
-.vscode
--- a/FAQ.md
+++ b/FAQ.md
@ -19,16 +19,6 @@ bindsym $mod+Pause mode passthrough
 This makes it so that when you press $mod+Pause, all keybindings, except the one
 to switch back, are disabled.

-Disable `floating_modifier` during the mode if it's set up in your config file
-and you wish to be able to use the same functionality in the nested desktop:
-```
-mode passthrough {
-    bindsym $mod+Pause mode default; floating_modifier $mod normal
-}
-bindsym $mod+Pause mode passthrough; floating_modifier none
-```
-Replace `$mod normal` with different arguments if applicable.
-
 **Q: Not all symbols show up when I'm typing. What can I do to fix this?**

 A: Try setting the keyboard layout in wayvnc to the one that most closely
--- a/FUNDING.yml
+++ b/FUNDING.yml
@ -1,2 +1 @@
-github: any1
 patreon: andriyngvason
--- a/README.md
+++ b/README.md
@ -1,7 +1,7 @@
 # wayvnc

 [![Build and Unit Test](https://github.com/any1/wayvnc/actions/workflows/build.yml/badge.svg)](https://github.com/any1/wayvnc/actions/workflows/build.yml)
-[![builds.sr.ht status](https://builds.sr.ht/~andri/wayvnc/pulls/1.svg)](https://builds.sr.ht/~andri/wayvnc/pulls/1?)
+[![builds.sr.ht status](https://builds.sr.ht/~andri/wayvnc/commits/master.svg)](https://builds.sr.ht/~andri/wayvnc/commits/master?)
 [![Packaging status](https://repology.org/badge/tiny-repos/wayvnc.svg)](https://repology.org/project/wayvnc/versions)

 ## Introduction
@ -16,6 +16,27 @@ support, join the #wayvnc IRC channel on libera.chat, or ask your questions on t
 GitHub [discussion forum](https://github.com/any1/wayvnc/discussions) for the
 project.

+## Installing
+```
+# Arch Linux
+pacman -S wayvnc
+
+# FreeBSD
+pkg install wayvnc
+
+# Fedora
+dnf install wayvnc
+
+# Debian (unstable / testing)
+apt install wayvnc
+
+# openSUSE Tumbleweed
+zypper install wayvnc
+
+# Void Linux
+xbps-install wayvnc
+```
+
 ## Building
 ### Runtime Dependencies
 * aml
@ -116,17 +137,12 @@ use SSH tunneling while listening on localhost, but users can also be
 authenticated when connecting to wayvnc.

 ### Encryption & Authentication
-
-#### VeNCrypt (TLS)
-For TLS, you'll need a private X509 key and a certificate. A self-signed key
-with a certificate can be generated like so:
+You'll need a private X509 key and a certificate. A self-signed key with a
+certificate can be generated like so:
 ```
-cd ~/.config/wayvnc
-openssl req -x509 -newkey ec -pkeyopt ec_paramgen_curve:secp384r1 -sha384 \
-	-days 3650 -nodes -keyout tls_key.pem -out tls_cert.pem \
-	-subj /CN=localhost \
+openssl req -x509 -newkey rsa:4096 -sha256 -days 3650 -nodes \
+	-keyout key.pem -out cert.pem -subj /CN=localhost \
 	-addext subjectAltName=DNS:localhost,DNS:localhost,IP:127.0.0.1
-cd -
 ```
 Replace `localhost` and `127.0.0.1` in the command above with your public facing
 host name and IP address, respectively, or just keep them as is if you're
@ -136,42 +152,14 @@ Create a config with the authentication info and load it using the `--config`
 command line option or place it at the default location
 `$HOME/.config/wayvnc/config`.
 ```
-use_relative_paths=true
 address=0.0.0.0
 enable_auth=true
 username=luser
 password=p455w0rd
-private_key_file=tls_key.pem
-certificate_file=tls_cert.pem
+private_key_file=/path/to/key.pem
+certificate_file=/path/to/cert.pem
 ```

-#### RSA-AES
-The RSA-AES security type combines RSA with AES in EAX mode to provide secure
-authentication and encryption that's resilient to eavesdropping and MITM. Its
-main weakness is that the user has to verify the server's credentials on first
-use. Thereafter, the client software should warn the user if the server's
-credentials change. It's a Trust on First Use (TOFU) scheme as employed by SSH.
-
-For the RSA-AES to be enabled, you need to generate an RSA key. This can be
-achieved like so:
-```
-ssh-keygen -m pem -f ~/.config/wayvnc/rsa_key.pem -t rsa -N ""
-```
-
-You also need to tell wayvnc where this file is located, by setting setting the
-`rsa_private_key_file` configuration parameter:
-```
-use_relative_paths=true
-address=0.0.0.0
-enable_auth=true
-username=luser
-password=p455w0rd
-rsa_private_key_file=rsa_key.pem
-```
-
-You may also add credentials for TLS in combination with RSA. The client will
-choose.
-
 ### wayvncctl control socket

 To facilitate runtime interaction and control, wayvnc opens a unix domain socket
--- a/examples/auto-attach.py
+++ b/examples/auto-attach.py
@ -1,88 +0,0 @@
-#!/usr/bin/env python
-
-import asyncio
-import json
-import re
-import os
-import glob
-
-class Program:
-	command_seq = 0
-	reader = None
-	writer = None
-	read_buffer = ""
-	message_queue = asyncio.Queue()
-	reply_queue = asyncio.Queue()
-	decoder = json.JSONDecoder()
-	tasks = []
-
-	async def read_message(self):
-		while True:
-			try:
-				result, index = self.decoder.raw_decode(self.read_buffer)
-				self.read_buffer = self.read_buffer[index:].lstrip()
-				return result
-			except json.JSONDecodeError:
-				data = await self.reader.read(4096)
-				self.read_buffer += data.decode('utf-8')
-
-	async def send_command(self, method, params = None):
-		cmd = {
-			"method": method,
-			"id": self.command_seq,
-		}
-
-		if not params is None:
-			cmd['params'] = params
-
-		self.command_seq += 1
-		self.writer.write(json.dumps(cmd).encode())
-		await self.writer.drain()
-
-		reply = await self.reply_queue.get()
-		self.reply_queue.task_done()
-		return reply['code'] == 0
-
-	async def attach(self, display):
-		return await self.send_command('attach', {'display': display})
-
-	async def attach_any(self):
-		for path in glob.iglob('/run/user/*/wayland-*'):
-			if path.endswith('.lock'):
-				continue
-
-			if await self.attach(path):
-				return True
-
-		return False
-
-	async def handle_detached(self):
-		while not await self.attach_any():
-			await asyncio.sleep(1.0)
-
-	async def process_message(self, message):
-		method = message['method']
-		if (method == 'detached'):
-			await self.handle_detached()
-
-	async def message_processor(self):
-		while True:
-			message = await self.read_message()
-			if 'method' in message:
-				await self.message_queue.put(message)
-			elif 'code' in message:
-				await self.reply_queue.put(message)
-
-	async def main(self):
-		self.reader, self.writer = await asyncio.open_unix_connection("/tmp/wayvncctl-0")
-		self.tasks.append(asyncio.create_task(self.message_processor()))
-
-		await self.attach_any()
-		await self.send_command("event-receive")
-
-		while True:
-			message = await self.message_queue.get()
-			await self.process_message(message)
-
-prog = Program()
-asyncio.run(prog.main())
--- a/include/cfg.h
+++ b/include/cfg.h
@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2020 - 2023 Andri Yngvason
+ * Copyright (c) 2020 Andri Yngvason
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
@ -21,10 +21,8 @@

 #define X_CFG_LIST \
 	X(bool, enable_auth) \
-	X(bool, relax_encryption) \
 	X(string, private_key_file) \
 	X(string, certificate_file) \
-	X(string, rsa_private_key_file) \
 	X(string, username) \
 	X(string, password) \
 	X(string, address) \
@ -35,10 +33,8 @@
 	X(string, xkb_layout) \
 	X(string, xkb_variant) \
 	X(string, xkb_options) \
-	X(bool, use_relative_paths) \

 struct cfg {
-	char* directory;
 #define string char*
 #define uint uint32_t
 #define X(type, name) type name;
--- a/include/ctl-commands.h
+++ b/include/ctl-commands.h
@ -1,6 +1,5 @@
 /*
 * Copyright (c) 2022-2023 Jim Ramsay
- * Copyright (c) 2023 Andri Yngvason
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
@ -20,8 +19,6 @@
 #include <stdbool.h>

 enum cmd_type {
-	CMD_ATTACH,
-	CMD_DETACH,
 	CMD_HELP,
 	CMD_EVENT_RECEIVE,
 	CMD_CLIENT_LIST,
@ -39,9 +36,6 @@ enum event_type {
 	EVT_CAPTURE_CHANGED,
 	EVT_CLIENT_CONNECTED,
 	EVT_CLIENT_DISCONNECTED,
-	EVT_DETACHED,
-	EVT_OUTPUT_ADDED,
-	EVT_OUTPUT_REMOVED,
 	EVT_UNKNOWN,
 };
 #define EVT_LIST_LEN EVT_UNKNOWN
--- a/include/ctl-server.h
+++ b/include/ctl-server.h
@ -1,6 +1,5 @@
 /*
 * Copyright (c) 2022 Jim Ramsay
- * Copyright (c) 2023 Andri Yngvason
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
@ -19,8 +18,6 @@

 #include "output.h"

-#include <sys/socket.h>
-
 struct ctl;
 struct cmd_response;

@ -28,12 +25,9 @@ struct ctl_server_client;

 struct ctl_server_client_info {
 	int id;
-	union {
-		struct sockaddr_storage address_storage;
-		struct sockaddr address;
-	};
-	const char* username;
-	const char* seat;
+	const char *hostname;
+	const char *username;
+	const char *seat;
 };

 struct ctl_server_output {
@ -47,8 +41,6 @@ struct ctl_server_output {

 struct ctl_server_actions {
 	void* userdata;
-	struct cmd_response* (*on_attach)(struct ctl*, const char* display);
-	struct cmd_response* (*on_detach)(struct ctl*);
 	struct cmd_response* (*on_output_cycle)(struct ctl*,
 			enum output_cycle_direction direction);
 	struct cmd_response* (*on_output_switch)(struct ctl*,
@ -87,8 +79,3 @@ void ctl_server_event_disconnected(struct ctl*,

 void ctl_server_event_capture_changed(struct ctl*,
 		const char* captured_output);
-
-void ctl_server_event_detached(struct ctl*);
-
-void ctl_server_event_output_added(struct ctl*, const char* name);
-void ctl_server_event_output_removed(struct ctl*, const char* name);
--- a/include/keyboard.h
+++ b/include/keyboard.h
@ -19,13 +19,11 @@
 #include <stdlib.h>
 #include <xkbcommon/xkbcommon.h>
 #include <stdbool.h>
-#include <neatvnc.h>

 #include "intset.h"

 struct zwp_virtual_keyboard_v1;
 struct table_entry;
-struct nvnc;

 struct keyboard {
 	struct zwp_virtual_keyboard_v1* virtual_keyboard;
@ -46,4 +44,3 @@ void keyboard_destroy(struct keyboard* self);
 void keyboard_feed(struct keyboard* self, xkb_keysym_t symbol, bool is_pressed);
 void keyboard_feed_code(struct keyboard* self, xkb_keycode_t code,
 		bool is_pressed);
-enum nvnc_keyboard_led_state keyboard_get_led_state(const struct keyboard*);
--- a/include/output-management.h
+++ b/include/output-management.h
@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2023 The wayvnc authors
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-#pragma once
-
-#include <stdint.h>
-#include <stdbool.h>
-
-struct output;
-struct zwlr_output_manager_v1;
-
-void wlr_output_manager_setup(struct zwlr_output_manager_v1* output_manager);
-bool wlr_output_manager_resize_output(struct output* output,
-	uint16_t width, uint16_t height);
-void wlr_output_manager_destroy(void);
--- a/include/output.h
+++ b/include/output.h
@ -57,7 +57,6 @@ struct output {

 	bool is_dimension_changed;
 	bool is_transform_changed;
-	bool is_headless;

 	void (*on_dimension_change)(struct output*);
 	void (*on_transform_change)(struct output*);
--- a/include/pixels.h
+++ b/include/pixels.h
@ -22,4 +22,3 @@

 enum wl_shm_format fourcc_to_wl_shm(uint32_t in);
 uint32_t fourcc_from_wl_shm(enum wl_shm_format in);
-int pixel_size_from_fourcc(uint32_t fourcc);
--- a/include/seat.h
+++ b/include/seat.h
@ -26,8 +26,6 @@ struct seat {
 	uint32_t id;
 	uint32_t capabilities;
 	char name[256];
-
-	uint32_t occupancy;
 };

 struct seat* seat_new(struct wl_seat* wl_seat, uint32_t id);
@ -36,5 +34,4 @@ void seat_list_destroy(struct wl_list* list);

 struct seat* seat_find_by_name(struct wl_list* list, const char* name);
 struct seat* seat_find_by_id(struct wl_list* list, uint32_t id);
-struct seat* seat_find_unoccupied(struct wl_list* list);
 struct seat* seat_first(struct wl_list* list);
--- a/include/util.h
+++ b/include/util.h
@ -19,7 +19,6 @@
 #include <sys/types.h>

 #define UDIV_UP(a, b) (((a) + (b) - 1) / (b))
-#define ALIGN_UP(a, b) ((b) * UDIV_UP((a), (b)))

 extern const char* wayvnc_version;

--- a/meson.build
+++ b/meson.build
@ -1,7 +1,7 @@
 project(
 	'wayvnc',
 	'c',
-	version: '0.9-dev',
+	version: '0.6.0',
 	license: 'ISC',
 	default_options: [
 		'c_std=gnu11',
@ -14,30 +14,26 @@ host_system = host_machine.system()
 prefix = get_option('prefix')

 c_args = [
+	'-DPROJECT_VERSION="@0@"'.format(meson.project_version()),
 	'-D_GNU_SOURCE',
 	'-DAML_UNSTABLE_API=1',
-	'-DWLR_USE_UNSTABLE=true',

 	'-Wno-unused-parameter',
 	'-Wno-missing-field-initializers',
 ]

-version = '"@0@"'.format(meson.project_version())
 git = find_program('git', native: true, required: false)
 if git.found()
-	git_commit = run_command([git, 'rev-parse', '--short', 'HEAD'], check: false)
-	git_branch = run_command([git, 'rev-parse', '--abbrev-ref', 'HEAD'], check: false)
-	if git_commit.returncode() == 0 and git_branch.returncode() == 0
-		version = '"v@0@-@1@ (@2@)"'.format(
-			meson.project_version(),
-			git_commit.stdout().strip(),
+	git_describe = run_command([git, 'describe', '--tags', '--long'])
+	git_branch = run_command([git, 'rev-parse', '--abbrev-ref', 'HEAD'])
+	if git_describe.returncode() == 0 and git_branch.returncode() == 0
+		c_args += '-DGIT_VERSION="@0@ (@1@)"'.format(
+			git_describe.stdout().strip(),
 			git_branch.stdout().strip(),
 		)
 	endif
 endif

-add_project_arguments('-DPROJECT_VERSION=@0@'.format(version), language: 'c')
-
 if buildtype != 'debug' and buildtype != 'debugoptimized'
 	c_args += '-DNDEBUG'
 endif
@ -54,18 +50,11 @@ pixman = dependency('pixman-1')
 gbm = dependency('gbm', required: get_option('screencopy-dmabuf'))
 drm = dependency('libdrm')
 xkbcommon = dependency('xkbcommon', version: '>=1.0.0')
-wayland_server = dependency('wayland-server')
 wayland_client = dependency('wayland-client')
-wayland_client_protocol = dependency('wayland-protocols')
-wayland_cursor = dependency('wayland-cursor')
 jansson = dependency('jansson')

-# Cursor image
-x11_dep = dependency('x11')
-x11_fixes_dep = dependency('xfixes')
-
 aml_version = ['>=0.3.0', '<0.4.0']
-neatvnc_version = ['>=0.9', '<0.10.0']
+neatvnc_version = ['>=0.6.0', '<0.7.0']

 neatvnc_project = subproject(
 	'neatvnc',
@ -86,7 +75,7 @@ else
 	neatvnc = dependency('neatvnc', version: neatvnc_version)
 endif

-inc = include_directories('include', '/usr/include/wlroots0.16')
+inc = include_directories('include')

 subdir('protocols')

@ -97,7 +86,6 @@ sources = [
 	'src/screencopy.c',
 	'src/data-control.c',
 	'src/output.c',
-	'src/output-management.c',
 	'src/pointer.c',
 	'src/keyboard.c',
 	'src/seat.c',
@ -127,11 +115,6 @@ dependencies = [
 	xkbcommon,
 	client_protos,
 	jansson,
-	x11_dep,
-	x11_fixes_dep,
-	wayland_client_protocol,
-	wayland_cursor,
-	wayland_server
 ]

 ctlsources = [
@ -157,10 +140,6 @@ if host_system == 'linux' and get_option('systemtap') and cc.has_header('sys/sdt
 	config.set('HAVE_USDT', true)
 endif

-if cc.has_header('linux/dma-heap.h') and cc.has_header('linux/dma-buf.h')
-	config.set('HAVE_LINUX_DMA_HEAP', true)
-endif
-
 if cc.has_function('memfd_create')
 	config.set('HAVE_MEMFD', true)
 	config.set('HAVE_MEMFD_CREATE', true)
--- a/protocols/meson.build
+++ b/protocols/meson.build
@ -21,9 +21,8 @@ client_protocols = [
 	'xdg-output-unstable-v1.xml',
 	'linux-dmabuf-unstable-v1.xml',
 	'wlr-data-control-unstable-v1.xml',
-	'wlr-output-management-unstable-v1.xml',
 	'wlr-output-power-management-unstable-v1.xml',
-	'ext-transient-seat-v1.xml',
+	'transient-seat-v1.xml',
 ]

 client_protos_src = []
--- a/protocols/ext-transient-seat-v1.xml
+++ b/protocols/ext-transient-seat-v1.xml
@ -1,5 +1,5 @@
 <?xml version="1.0" encoding="UTF-8"?>
-<protocol name="ext_transient_seat_v1">
+<protocol name="transient_seat_v1">
  <copyright>
    Copyright © 2020 - 2023 Andri Yngvason

@ -24,9 +24,9 @@
  </copyright>

  <description summary="protocol for creating temporary seats">
-    The transient seat protocol can be used by privileged clients to create
+    The transient seat protocol can be used by privileved clients to create
    independent seats that will be removed from the compositor when the client
-    destroys its transient seat.
+    destroys its seat.

    This protocol is intended for use with virtual input protocols such as
    "virtual_keyboard_unstable_v1" or "wlr_virtual_pointer_unstable_v1", both
@ -51,11 +51,8 @@

    <request name="create">
      <description summary="create a transient seat">
-        Create a new seat that is removed when the client side transient seat
-        object is destroyed.
-
-        The actual seat may be removed sooner, in which case the transient seat
-        object shall become inert.
+        Create a new seat that is removed when the client side object is
+        destroyed.
      </description>
      <arg name="seat" type="new_id" interface="ext_transient_seat_v1"/>
    </request>
@ -72,8 +69,8 @@

  <interface name="ext_transient_seat_v1" version="1">
    <description summary="transient seat handle">
-      When the transient seat handle is destroyed, the seat itself will also be
-      destroyed.
+      The life time of the transient seat handle is equal to that of the seat
+      itself.
    </description>

    <event name="ready">
--- a/protocols/wlr-output-management-unstable-v1.xml
+++ b/protocols/wlr-output-management-unstable-v1.xml
@ -1,601 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<protocol name="wlr_output_management_unstable_v1">
-  <copyright>
-    Copyright © 2019 Purism SPC
-
-    Permission to use, copy, modify, distribute, and sell this
-    software and its documentation for any purpose is hereby granted
-    without fee, provided that the above copyright notice appear in
-    all copies and that both that copyright notice and this permission
-    notice appear in supporting documentation, and that the name of
-    the copyright holders not be used in advertising or publicity
-    pertaining to distribution of the software without specific,
-    written prior permission.  The copyright holders make no
-    representations about the suitability of this software for any
-    purpose.  It is provided "as is" without express or implied
-    warranty.
-
-    THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
-    SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
-    FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
-    SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
-    AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-    ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
-    THIS SOFTWARE.
-  </copyright>
-
-  <description summary="protocol to configure output devices">
-    This protocol exposes interfaces to obtain and modify output device
-    configuration.
-
-    Warning! The protocol described in this file is experimental and
-    backward incompatible changes may be made. Backward compatible changes
-    may be added together with the corresponding interface version bump.
-    Backward incompatible changes are done by bumping the version number in
-    the protocol and interface names and resetting the interface version.
-    Once the protocol is to be declared stable, the 'z' prefix and the
-    version number in the protocol and interface names are removed and the
-    interface version number is reset.
-  </description>
-
-  <interface name="zwlr_output_manager_v1" version="4">
-    <description summary="output device configuration manager">
-      This interface is a manager that allows reading and writing the current
-      output device configuration.
-
-      Output devices that display pixels (e.g. a physical monitor or a virtual
-      output in a window) are represented as heads. Heads cannot be created nor
-      destroyed by the client, but they can be enabled or disabled and their
-      properties can be changed. Each head may have one or more available modes.
-
-      Whenever a head appears (e.g. a monitor is plugged in), it will be
-      advertised via the head event. Immediately after the output manager is
-      bound, all current heads are advertised.
-
-      Whenever a head's properties change, the relevant wlr_output_head events
-      will be sent. Not all head properties will be sent: only properties that
-      have changed need to.
-
-      Whenever a head disappears (e.g. a monitor is unplugged), a
-      wlr_output_head.finished event will be sent.
-
-      After one or more heads appear, change or disappear, the done event will
-      be sent. It carries a serial which can be used in a create_configuration
-      request to update heads properties.
-
-      The information obtained from this protocol should only be used for output
-      configuration purposes. This protocol is not designed to be a generic
-      output property advertisement protocol for regular clients. Instead,
-      protocols such as xdg-output should be used.
-    </description>
-
-    <event name="head">
-      <description summary="introduce a new head">
-        This event introduces a new head. This happens whenever a new head
-        appears (e.g. a monitor is plugged in) or after the output manager is
-        bound.
-      </description>
-      <arg name="head" type="new_id" interface="zwlr_output_head_v1"/>
-    </event>
-
-    <event name="done">
-      <description summary="sent all information about current configuration">
-        This event is sent after all information has been sent after binding to
-        the output manager object and after any subsequent changes. This applies
-        to child head and mode objects as well. In other words, this event is
-        sent whenever a head or mode is created or destroyed and whenever one of
-        their properties has been changed. Not all state is re-sent each time
-        the current configuration changes: only the actual changes are sent.
-
-        This allows changes to the output configuration to be seen as atomic,
-        even if they happen via multiple events.
-
-        A serial is sent to be used in a future create_configuration request.
-      </description>
-      <arg name="serial" type="uint" summary="current configuration serial"/>
-    </event>
-
-    <request name="create_configuration">
-      <description summary="create a new output configuration object">
-        Create a new output configuration object. This allows to update head
-        properties.
-      </description>
-      <arg name="id" type="new_id" interface="zwlr_output_configuration_v1"/>
-      <arg name="serial" type="uint"/>
-    </request>
-
-    <request name="stop">
-      <description summary="stop sending events">
-        Indicates the client no longer wishes to receive events for output
-        configuration changes. However the compositor may emit further events,
-        until the finished event is emitted.
-
-        The client must not send any more requests after this one.
-      </description>
-    </request>
-
-    <event name="finished" type="destructor">
-      <description summary="the compositor has finished with the manager">
-        This event indicates that the compositor is done sending manager events.
-        The compositor will destroy the object immediately after sending this
-        event, so it will become invalid and the client should release any
-        resources associated with it.
-      </description>
-    </event>
-  </interface>
-
-  <interface name="zwlr_output_head_v1" version="4">
-    <description summary="output device">
-      A head is an output device. The difference between a wl_output object and
-      a head is that heads are advertised even if they are turned off. A head
-      object only advertises properties and cannot be used directly to change
-      them.
-
-      A head has some read-only properties: modes, name, description and
-      physical_size. These cannot be changed by clients.
-
-      Other properties can be updated via a wlr_output_configuration object.
-
-      Properties sent via this interface are applied atomically via the
-      wlr_output_manager.done event. No guarantees are made regarding the order
-      in which properties are sent.
-    </description>
-
-    <event name="name">
-      <description summary="head name">
-        This event describes the head name.
-
-        The naming convention is compositor defined, but limited to alphanumeric
-        characters and dashes (-). Each name is unique among all wlr_output_head
-        objects, but if a wlr_output_head object is destroyed the same name may
-        be reused later. The names will also remain consistent across sessions
-        with the same hardware and software configuration.
-
-        Examples of names include 'HDMI-A-1', 'WL-1', 'X11-1', etc. However, do
-        not assume that the name is a reflection of an underlying DRM
-        connector, X11 connection, etc.
-
-        If the compositor implements the xdg-output protocol and this head is
-        enabled, the xdg_output.name event must report the same name.
-
-        The name event is sent after a wlr_output_head object is created. This
-        event is only sent once per object, and the name does not change over
-        the lifetime of the wlr_output_head object.
-      </description>
-      <arg name="name" type="string"/>
-    </event>
-
-    <event name="description">
-      <description summary="head description">
-        This event describes a human-readable description of the head.
-
-        The description is a UTF-8 string with no convention defined for its
-        contents. Examples might include 'Foocorp 11" Display' or 'Virtual X11
-        output via :1'. However, do not assume that the name is a reflection of
-        the make, model, serial of the underlying DRM connector or the display
-        name of the underlying X11 connection, etc.
-
-        If the compositor implements xdg-output and this head is enabled,
-        the xdg_output.description must report the same description.
-
-        The description event is sent after a wlr_output_head object is created.
-        This event is only sent once per object, and the description does not
-        change over the lifetime of the wlr_output_head object.
-      </description>
-      <arg name="description" type="string"/>
-    </event>
-
-    <event name="physical_size">
-      <description summary="head physical size">
-        This event describes the physical size of the head. This event is only
-        sent if the head has a physical size (e.g. is not a projector or a
-        virtual device).
-      </description>
-      <arg name="width" type="int" summary="width in millimeters of the output"/>
-      <arg name="height" type="int" summary="height in millimeters of the output"/>
-    </event>
-
-    <event name="mode">
-      <description summary="introduce a mode">
-        This event introduces a mode for this head. It is sent once per
-        supported mode.
-      </description>
-      <arg name="mode" type="new_id" interface="zwlr_output_mode_v1"/>
-    </event>
-
-    <event name="enabled">
-      <description summary="head is enabled or disabled">
-        This event describes whether the head is enabled. A disabled head is not
-        mapped to a region of the global compositor space.
-
-        When a head is disabled, some properties (current_mode, position,
-        transform and scale) are irrelevant.
-      </description>
-      <arg name="enabled" type="int" summary="zero if disabled, non-zero if enabled"/>
-    </event>
-
-    <event name="current_mode">
-      <description summary="current mode">
-        This event describes the mode currently in use for this head. It is only
-        sent if the output is enabled.
-      </description>
-      <arg name="mode" type="object" interface="zwlr_output_mode_v1"/>
-    </event>
-
-    <event name="position">
-      <description summary="current position">
-        This events describes the position of the head in the global compositor
-        space. It is only sent if the output is enabled.
-      </description>
-      <arg name="x" type="int"
-        summary="x position within the global compositor space"/>
-      <arg name="y" type="int"
-        summary="y position within the global compositor space"/>
-    </event>
-
-    <event name="transform">
-      <description summary="current transformation">
-        This event describes the transformation currently applied to the head.
-        It is only sent if the output is enabled.
-      </description>
-      <arg name="transform" type="int" enum="wl_output.transform"/>
-    </event>
-
-    <event name="scale">
-      <description summary="current scale">
-        This events describes the scale of the head in the global compositor
-        space. It is only sent if the output is enabled.
-      </description>
-      <arg name="scale" type="fixed"/>
-    </event>
-
-    <event name="finished">
-      <description summary="the head has disappeared">
-        This event indicates that the head is no longer available. The head
-        object becomes inert. Clients should send a destroy request and release
-        any resources associated with it.
-      </description>
-    </event>
-
-    <!-- Version 2 additions -->
-
-    <event name="make" since="2">
-      <description summary="head manufacturer">
-        This event describes the manufacturer of the head.
-
-        This must report the same make as the wl_output interface does in its
-        geometry event.
-
-        Together with the model and serial_number events the purpose is to
-        allow clients to recognize heads from previous sessions and for example
-        load head-specific configurations back.
-
-        It is not guaranteed this event will be ever sent. A reason for that
-        can be that the compositor does not have information about the make of
-        the head or the definition of a make is not sensible in the current
-        setup, for example in a virtual session. Clients can still try to
-        identify the head by available information from other events but should
-        be aware that there is an increased risk of false positives.
-
-        It is not recommended to display the make string in UI to users. For
-        that the string provided by the description event should be preferred.
-      </description>
-      <arg name="make" type="string"/>
-    </event>
-
-    <event name="model" since="2">
-      <description summary="head model">
-        This event describes the model of the head.
-
-        This must report the same model as the wl_output interface does in its
-        geometry event.
-
-        Together with the make and serial_number events the purpose is to
-        allow clients to recognize heads from previous sessions and for example
-        load head-specific configurations back.
-
-        It is not guaranteed this event will be ever sent. A reason for that
-        can be that the compositor does not have information about the model of
-        the head or the definition of a model is not sensible in the current
-        setup, for example in a virtual session. Clients can still try to
-        identify the head by available information from other events but should
-        be aware that there is an increased risk of false positives.
-
-        It is not recommended to display the model string in UI to users. For
-        that the string provided by the description event should be preferred.
-      </description>
-      <arg name="model" type="string"/>
-    </event>
-
-    <event name="serial_number" since="2">
-      <description summary="head serial number">
-        This event describes the serial number of the head.
-
-        Together with the make and model events the purpose is to allow clients
-        to recognize heads from previous sessions and for example load head-
-        specific configurations back.
-
-        It is not guaranteed this event will be ever sent. A reason for that
-        can be that the compositor does not have information about the serial
-        number of the head or the definition of a serial number is not sensible
-        in the current setup. Clients can still try to identify the head by
-        available information from other events but should be aware that there
-        is an increased risk of false positives.
-
-        It is not recommended to display the serial_number string in UI to
-        users. For that the string provided by the description event should be
-        preferred.
-      </description>
-      <arg name="serial_number" type="string"/>
-    </event>
-
-    <!-- Version 3 additions -->
-
-    <request name="release" type="destructor" since="3">
-      <description summary="destroy the head object">
-        This request indicates that the client will no longer use this head
-        object.
-      </description>
-    </request>
-
-    <!-- Version 4 additions -->
-
-    <enum name="adaptive_sync_state" since="4">
-      <entry name="disabled" value="0" summary="adaptive sync is disabled"/>
-      <entry name="enabled" value="1" summary="adaptive sync is enabled"/>
-    </enum>
-
-    <event name="adaptive_sync" since="4">
-      <description summary="current adaptive sync state">
-        This event describes whether adaptive sync is currently enabled for
-        the head or not. Adaptive sync is also known as Variable Refresh
-        Rate or VRR.
-      </description>
-      <arg name="state" type="uint" enum="adaptive_sync_state"/>
-    </event>
-  </interface>
-
-  <interface name="zwlr_output_mode_v1" version="3">
-    <description summary="output mode">
-      This object describes an output mode.
-
-      Some heads don't support output modes, in which case modes won't be
-      advertised.
-
-      Properties sent via this interface are applied atomically via the
-      wlr_output_manager.done event. No guarantees are made regarding the order
-      in which properties are sent.
-    </description>
-
-    <event name="size">
-      <description summary="mode size">
-        This event describes the mode size. The size is given in physical
-        hardware units of the output device. This is not necessarily the same as
-        the output size in the global compositor space. For instance, the output
-        may be scaled or transformed.
-      </description>
-      <arg name="width" type="int" summary="width of the mode in hardware units"/>
-      <arg name="height" type="int" summary="height of the mode in hardware units"/>
-    </event>
-
-    <event name="refresh">
-      <description summary="mode refresh rate">
-        This event describes the mode's fixed vertical refresh rate. It is only
-        sent if the mode has a fixed refresh rate.
-      </description>
-      <arg name="refresh" type="int" summary="vertical refresh rate in mHz"/>
-    </event>
-
-    <event name="preferred">
-      <description summary="mode is preferred">
-        This event advertises this mode as preferred.
-      </description>
-    </event>
-
-    <event name="finished">
-      <description summary="the mode has disappeared">
-        This event indicates that the mode is no longer available. The mode
-        object becomes inert. Clients should send a destroy request and release
-        any resources associated with it.
-      </description>
-    </event>
-
-    <!-- Version 3 additions -->
-
-    <request name="release" type="destructor" since="3">
-      <description summary="destroy the mode object">
-        This request indicates that the client will no longer use this mode
-        object.
-      </description>
-    </request>
-  </interface>
-
-  <interface name="zwlr_output_configuration_v1" version="4">
-    <description summary="output configuration">
-      This object is used by the client to describe a full output configuration.
-
-      First, the client needs to setup the output configuration. Each head can
-      be either enabled (and configured) or disabled. It is a protocol error to
-      send two enable_head or disable_head requests with the same head. It is a
-      protocol error to omit a head in a configuration.
-
-      Then, the client can apply or test the configuration. The compositor will
-      then reply with a succeeded, failed or cancelled event. Finally the client
-      should destroy the configuration object.
-    </description>
-
-    <enum name="error">
-      <entry name="already_configured_head" value="1"
-        summary="head has been configured twice"/>
-      <entry name="unconfigured_head" value="2"
-        summary="head has not been configured"/>
-      <entry name="already_used" value="3"
-        summary="request sent after configuration has been applied or tested"/>
-    </enum>
-
-    <request name="enable_head">
-      <description summary="enable and configure a head">
-        Enable a head. This request creates a head configuration object that can
-        be used to change the head's properties.
-      </description>
-      <arg name="id" type="new_id" interface="zwlr_output_configuration_head_v1"
-        summary="a new object to configure the head"/>
-      <arg name="head" type="object" interface="zwlr_output_head_v1"
-        summary="the head to be enabled"/>
-    </request>
-
-    <request name="disable_head">
-      <description summary="disable a head">
-        Disable a head.
-      </description>
-      <arg name="head" type="object" interface="zwlr_output_head_v1"
-        summary="the head to be disabled"/>
-    </request>
-
-    <request name="apply">
-      <description summary="apply the configuration">
-        Apply the new output configuration.
-
-        In case the configuration is successfully applied, there is no guarantee
-        that the new output state matches completely the requested
-        configuration. For instance, a compositor might round the scale if it
-        doesn't support fractional scaling.
-
-        After this request has been sent, the compositor must respond with an
-        succeeded, failed or cancelled event. Sending a request that isn't the
-        destructor is a protocol error.
-      </description>
-    </request>
-
-    <request name="test">
-      <description summary="test the configuration">
-        Test the new output configuration. The configuration won't be applied,
-        but will only be validated.
-
-        Even if the compositor succeeds to test a configuration, applying it may
-        fail.
-
-        After this request has been sent, the compositor must respond with an
-        succeeded, failed or cancelled event. Sending a request that isn't the
-        destructor is a protocol error.
-      </description>
-    </request>
-
-    <event name="succeeded">
-      <description summary="configuration changes succeeded">
-        Sent after the compositor has successfully applied the changes or
-        tested them.
-
-        Upon receiving this event, the client should destroy this object.
-
-        If the current configuration has changed, events to describe the changes
-        will be sent followed by a wlr_output_manager.done event.
-      </description>
-    </event>
-
-    <event name="failed">
-      <description summary="configuration changes failed">
-        Sent if the compositor rejects the changes or failed to apply them. The
-        compositor should revert any changes made by the apply request that
-        triggered this event.
-
-        Upon receiving this event, the client should destroy this object.
-      </description>
-    </event>
-
-    <event name="cancelled">
-      <description summary="configuration has been cancelled">
-        Sent if the compositor cancels the configuration because the state of an
-        output changed and the client has outdated information (e.g. after an
-        output has been hotplugged).
-
-        The client can create a new configuration with a newer serial and try
-        again.
-
-        Upon receiving this event, the client should destroy this object.
-      </description>
-    </event>
-
-    <request name="destroy" type="destructor">
-      <description summary="destroy the output configuration">
-        Using this request a client can tell the compositor that it is not going
-        to use the configuration object anymore. Any changes to the outputs
-        that have not been applied will be discarded.
-
-        This request also destroys wlr_output_configuration_head objects created
-        via this object.
-      </description>
-    </request>
-  </interface>
-
-  <interface name="zwlr_output_configuration_head_v1" version="4">
-    <description summary="head configuration">
-      This object is used by the client to update a single head's configuration.
-
-      It is a protocol error to set the same property twice.
-    </description>
-
-    <enum name="error">
-      <entry name="already_set" value="1" summary="property has already been set"/>
-      <entry name="invalid_mode" value="2" summary="mode doesn't belong to head"/>
-      <entry name="invalid_custom_mode" value="3" summary="mode is invalid"/>
-      <entry name="invalid_transform" value="4" summary="transform value outside enum"/>
-      <entry name="invalid_scale" value="5" summary="scale negative or zero"/>
-      <entry name="invalid_adaptive_sync_state" value="6" since="4"
-        summary="invalid enum value used in the set_adaptive_sync request"/>
-    </enum>
-
-    <request name="set_mode">
-      <description summary="set the mode">
-        This request sets the head's mode.
-      </description>
-      <arg name="mode" type="object" interface="zwlr_output_mode_v1"/>
-    </request>
-
-    <request name="set_custom_mode">
-      <description summary="set a custom mode">
-        This request assigns a custom mode to the head. The size is given in
-        physical hardware units of the output device. If set to zero, the
-        refresh rate is unspecified.
-
-        It is a protocol error to set both a mode and a custom mode.
-      </description>
-      <arg name="width" type="int" summary="width of the mode in hardware units"/>
-      <arg name="height" type="int" summary="height of the mode in hardware units"/>
-      <arg name="refresh" type="int" summary="vertical refresh rate in mHz or zero"/>
-    </request>
-
-    <request name="set_position">
-      <description summary="set the position">
-        This request sets the head's position in the global compositor space.
-      </description>
-      <arg name="x" type="int" summary="x position in the global compositor space"/>
-      <arg name="y" type="int" summary="y position in the global compositor space"/>
-    </request>
-
-    <request name="set_transform">
-      <description summary="set the transform">
-        This request sets the head's transform.
-      </description>
-      <arg name="transform" type="int" enum="wl_output.transform"/>
-    </request>
-
-    <request name="set_scale">
-      <description summary="set the scale">
-        This request sets the head's scale.
-      </description>
-      <arg name="scale" type="fixed"/>
-    </request>
-
-    <!-- Version 4 additions -->
-
-    <request name="set_adaptive_sync" since="4">
-      <description summary="enable/disable adaptive sync">
-        This request enables/disables adaptive sync. Adaptive sync is also
-        known as Variable Refresh Rate or VRR.
-      </description>
-      <arg name="state" type="uint" enum="zwlr_output_head_v1.adaptive_sync_state"/>
-    </request>
-  </interface>
-</protocol>
--- a/src/buffer.c
+++ b/src/buffer.c
@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2020 - 2024 Andri Yngvason
+ * Copyright (c) 2020 - 2021 Andri Yngvason
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
@ -31,20 +31,10 @@
 #include "buffer.h"
 #include "pixels.h"
 #include "config.h"
-#include "util.h"

 #ifdef ENABLE_SCREENCOPY_DMABUF
 #include <gbm.h>
-#include <sys/ioctl.h>
-#include <fcntl.h>
-
-// #ifdef HAVE_LINUX_DMA_HEAP
-#include <linux/dma-buf.h>
-#include <linux/dma-heap.h>
-
-#define LINUX_CMA_PATH "/dev/dma_heap/linux,cma"
-//#endif // HAVE_LINUX_DMA_HEAP
-#endif // ENABLE_SCREENCOPY_DMABUF
+#endif

 extern struct wl_shm* wl_shm;
 extern struct zwp_linux_dmabuf_v1* zwp_linux_dmabuf;
@ -101,10 +91,9 @@ struct wv_buffer* wv_buffer_create_shm(int width,
 	if (!self->wl_buffer)
 		goto shm_failure;

-	int bpp = pixel_size_from_fourcc(fourcc);
-	assert(bpp > 0);
+	// TODO: Get the pixel size from the format instead of assuming it's 4.
 	self->nvnc_fb = nvnc_fb_from_buffer(self->pixels, width, height, fourcc,
-			stride / bpp);
+			stride / 4);
 	if (!self->nvnc_fb) {
 		goto nvnc_fb_failure;
 	}
@ -128,81 +117,6 @@ failure:
 }

 #ifdef ENABLE_SCREENCOPY_DMABUF
-#ifdef HAVE_LINUX_DMA_HEAP
-static bool have_linux_cma(void)
-{
-	return access(LINUX_CMA_PATH, R_OK | W_OK) == 0;
-}
-
-static int linux_cma_alloc(size_t size)
-{
-	int fd = open(LINUX_CMA_PATH, O_RDWR | O_CLOEXEC, 0);
-	if (fd < 0) {
-		nvnc_log(NVNC_LOG_ERROR, "Failed to open CMA device: %m");
-		return -1;
-	}
-
-	struct dma_heap_allocation_data data = {
-		.len = size,
-		.fd_flags = O_CLOEXEC | O_RDWR,
-	};
-
-	int r = ioctl(fd, DMA_HEAP_IOCTL_ALLOC, &data);
-	if (r < 0) {
-		nvnc_log(NVNC_LOG_ERROR, "Failed to allocate CMA buffer: %m");
-		return -1;
-	}
-	close(fd);
-
-        return data.fd;
-}
-
-// Some devices (mostly ARM SBCs) need CMA for hardware encoders.
-static struct gbm_bo* create_cma_gbm_bo(int width, int height, uint32_t fourcc)
-{
-	assert(gbm_device);
-
-	int bpp = pixel_size_from_fourcc(fourcc);
-	if (!bpp) {
-		nvnc_log(NVNC_LOG_PANIC, "Unsupported pixel format: %" PRIu32,
-				fourcc);
-	}
-
-	/* TODO: Get alignment through feedback mechanism.
-	 * Buffer sizes are aligned on both axes by 16 and we'll do the same
-	 * in the encoder, but this requirement should come from the encoder.
-	 */
-	int stride = bpp * ALIGN_UP(width, 16);
-
-	int fd = linux_cma_alloc(stride * ALIGN_UP(height, 16));
-	if (fd < 0) {
-		return NULL;
-	}
-
-	struct gbm_import_fd_modifier_data d = {
-		.format = fourcc,
-		.width = width,
-		.height = height,
-		// v4l2m2m doesn't support modifiers, so we use linear
-		.modifier = DRM_FORMAT_MOD_LINEAR,
-		.num_fds = 1,
-		.fds[0] = fd,
-		.offsets[0] = 0,
-		.strides[0] = stride,
-	};
-
-	struct gbm_bo* bo = gbm_bo_import(gbm_device, GBM_BO_IMPORT_FD_MODIFIER,
-			&d, 0);
-	if (!bo) {
-		nvnc_log(NVNC_LOG_DEBUG, "Failed to import dmabuf: %m");
-		close(fd);
-		return NULL;
-	}
-
-	return bo;
-}
-#endif // HAVE_LINUX_DMA_HEAP
-
 static struct wv_buffer* wv_buffer_create_dmabuf(int width, int height,
 		uint32_t fourcc)
 {
@ -218,17 +132,8 @@ static struct wv_buffer* wv_buffer_create_dmabuf(int width, int height,
 	self->height = height;
 	self->format = fourcc;

-// Checks not needed anymore. Fixed with SCANOUT and within neatvnc for most GPUs.
-// But this could still fail!
-//#ifdef HAVE_LINUX_DMA_HEAP
-	self->bo = have_linux_cma() ?
-		create_cma_gbm_bo(width, height, fourcc) :
-		gbm_bo_create(gbm_device, width, height, fourcc,
-				GBM_BO_USE_RENDERING | GBM_BO_USE_SCANOUT);
-//#endif
-//	self->bo = gbm_bo_create(gbm_device, width, height, fourcc,
-//				GBM_BO_USE_RENDERING);
-
+	self->bo = gbm_bo_create(gbm_device, width, height, fourcc,
+			GBM_BO_USE_RENDERING);
 	if (!self->bo)
 		goto bo_failure;

--- a/src/cfg.c
+++ b/src/cfg.c
@ -18,8 +18,6 @@
 #include <stdlib.h>
 #include <string.h>
 #include <ctype.h>
-#include <libgen.h>
-#include <limits.h>

 #include "cfg.h"

@ -108,16 +106,11 @@ static int cfg__load_line(struct cfg* self, char* line)
 	return cfg__load_key_value(self, key, value);
 }

-static char* cfg__dirname(const char* path)
-{
-	char buffer[PATH_MAX];
-	return strdup(dirname(realpath(path, buffer)));
-}
-
 int cfg_load(struct cfg* self, const char* requested_path)
 {
 	const char* path = requested_path ? requested_path
 	                                  : cfg__get_default_path();
+
 	if (!path)
 		return -1;

@ -125,8 +118,6 @@ int cfg_load(struct cfg* self, const char* requested_path)
 	if (!stream)
 		return -1;

-	self->directory = cfg__dirname(path);
-
 	char* line = NULL;
 	size_t len = 0;
 	int lineno = 0;
@ -145,7 +136,6 @@ int cfg_load(struct cfg* self, const char* requested_path)
 failure:
 	cfg_destroy(self);
 	free(line);
-	free(self->directory);
 	fclose(stream);
 	return lineno;
 }
@ -163,5 +153,4 @@ void cfg_destroy(struct cfg* self)
 #undef DESTROY_string
 #undef DESTROY_uint
 #undef DESTROY_bool
-	free(self->directory);
 }
--- a/src/ctl-client.c
+++ b/src/ctl-client.c
@ -1,6 +1,5 @@
 /*
 * Copyright (c) 2022-2023 Jim Ramsay
- * Copyright (c) 2023 Andri Yngvason
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
@ -354,17 +353,17 @@ static void pretty_client_list(json_t* data)
 	json_t* value;
 	json_array_foreach(data, i, value) {
 		char* id = NULL;
-		char* address = NULL;
+		char* hostname = NULL;
 		char* username = NULL;

-		json_unpack(value, "{s:s, s?s, s?s}", "id", &id, "address",
-				&address, "username", &username);
+		json_unpack(value, "{s:s, s?s, s?s}", "id", &id, "hostname",
+				&hostname, "username", &username);
 		printf("  %s: ", id);

 		if (username)
 			printf("%s@", username);

-		printf("%s\n", address ? address : "<unknown>");
+		printf("%s\n", hostname ? hostname : "<unknown>");
 	}
 }

@ -404,8 +403,6 @@ static void pretty_print(json_t* data,
 	case CMD_OUTPUT_LIST:
 		pretty_output_list(data);
 		break;
-	case CMD_ATTACH:
-	case CMD_DETACH:
 	case CMD_CLIENT_DISCONNECT:
 	case CMD_OUTPUT_SET:
 	case CMD_OUTPUT_CYCLE:
--- a/src/ctl-commands.c
+++ b/src/ctl-commands.c
@ -1,6 +1,5 @@
 /*
 * Copyright (c) 2022-2023 Jim Ramsay
- * Copyright (c) 2023 Andri Yngvason
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
@ -21,19 +20,6 @@
 #include <string.h>

 struct cmd_info ctl_command_list[] = {
-	[CMD_ATTACH] = { "attach",
-		"Attach to a running wayland compositor",
-		{
-			{ "display", "Display name", "<name>",
-				.positional = true },
-			{},
-		}
-
-	},
-	[CMD_DETACH] = { "detach",
-		"Detach from the wayland compositor",
-		{{}},
-	},
 	[CMD_HELP] = { "help",
 		"List all commands and events, or show usage of a specific command or event",
 		{
@ -98,8 +84,8 @@ struct cmd_info ctl_command_list[] = {
 	{ "connection_count", \
 		"The total number of connected VNC clients " including " this one.", \
 		"<integer>" }, \
-	{ "address", \
-		"The IP address of this client (may be null)", \
+	{ "hostname", \
+		"The hostname or IP address of this client (may be null)", \
 		"<name|ip>" }, \
 	{ "username", \
 		"The username used to authentice this client (may be null).", \
@ -124,24 +110,6 @@ struct cmd_info ctl_event_list[] = {
 		"Sent by waynvc when a VNC client disconnects",
 		{ CLIENT_EVENT_PARAMS("not including") }
 	},
-	[EVT_DETACHED] = {"detached",
-		"Sent after detaching from compositor",
-		{}
-	},
-	[EVT_OUTPUT_ADDED] = {"output-added",
-		"Sent when an output is added by the compositor",
-		{
-			{ "name", "Output name", "<string>" },
-			{}
-		}
-	},
-	[EVT_OUTPUT_REMOVED] = {"output-removed",
-		"Sent when an output is removed by the compositor",
-		{
-			{ "name", "Output name", "<string>" },
-			{}
-		}
-	},
 };

 enum cmd_type ctl_command_parse_name(const char* name)
--- a/src/ctl-server.c
+++ b/src/ctl-server.c
@ -1,6 +1,5 @@
 /*
 * Copyright (c) 2022-2023 Jim Ramsay
- * Copyright (c) 2023 Andri Yngvason
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
@ -27,8 +26,6 @@
 #include <neatvnc.h>
 #include <aml.h>
 #include <jansson.h>
-#include <arpa/inet.h>
-#include <netinet/in.h>

 #include "output.h"
 #include "ctl-commands.h"
@ -49,11 +46,6 @@ struct cmd {
 	enum cmd_type type;
 };

-struct cmd_attach {
-	struct cmd cmd;
-	char display[128];
-};
-
 struct cmd_help {
 	struct cmd cmd;
 	char id[64];
@ -113,19 +105,6 @@ static void cmd_response_destroy(struct cmd_response* self)
 	free(self);
 }

-static struct cmd_attach* cmd_attach_new(json_t* args,
-		struct jsonipc_error* err)
-{
-	const char* display = NULL;
-	if (json_unpack(args, "{s:s}", "display", &display) == -1) {
-		jsonipc_error_printf(err, EINVAL, "Missing display name");
-		return NULL;
-	}
-	struct cmd_attach* cmd = calloc(1, sizeof(*cmd));
-	strlcpy(cmd->display, display, sizeof(cmd->display));
-	return cmd;
-}
-
 static struct cmd_help* cmd_help_new(json_t* args,
 		struct jsonipc_error* err)
 {
@ -206,9 +185,6 @@ static struct cmd* parse_command(struct jsonipc_request* ipc,
 	enum cmd_type cmd_type = ctl_command_parse_name(ipc->method);
 	struct cmd* cmd = NULL;
 	switch (cmd_type) {
-	case CMD_ATTACH:
-		cmd = (struct cmd*)cmd_attach_new(ipc->params, err);
-		break;
 	case CMD_HELP:
 		cmd = (struct cmd*)cmd_help_new(ipc->params, err);
 		break;
@ -218,7 +194,6 @@ static struct cmd* parse_command(struct jsonipc_request* ipc,
 	case CMD_CLIENT_DISCONNECT:
 		cmd = (struct cmd*)cmd_disconnect_client_new(ipc->params, err);
 		break;
-	case CMD_DETACH:
 	case CMD_VERSION:
 	case CMD_EVENT_RECEIVE:
 	case CMD_CLIENT_LIST:
@ -364,25 +339,6 @@ static struct ctl_server_client* ctl_server_client_next(struct ctl* self,
 	return self->actions.client_next(self, prev);
 }

-static int sockaddr_to_string(char* dst, size_t sz, const struct sockaddr* addr)
-{
-	struct sockaddr_in* sa_in = (struct sockaddr_in*)addr;
-	struct sockaddr_in6* sa_in6 = (struct sockaddr_in6*)addr;
-
-	switch (addr->sa_family) {
-	case AF_INET:
-		inet_ntop(addr->sa_family, &sa_in->sin_addr, dst, sz);
-		return 0;
-	case AF_INET6:
-		inet_ntop(addr->sa_family, &sa_in6->sin6_addr, dst, sz);
-		return 0;
-	}
-	nvnc_log(NVNC_LOG_DEBUG,
-			"Don't know how to convert sa_family %d to string",
-			addr->sa_family);
-	return -1;
-}
-
 static void ctl_server_client_get_info(struct ctl* self,
 		const struct ctl_server_client* client,
 		struct ctl_server_client_info* info)
@ -405,21 +361,15 @@ static struct cmd_response* generate_vnc_client_list(struct ctl* self)
 		snprintf(id_str, sizeof(id_str), "%d", info.id);
 		json_t* packed = json_pack("{s:s}", "id", id_str);

-		char address_string[256];
-		if (sockaddr_to_string(address_string, sizeof(address_string),
-					&info.address) == 0) {
-			json_object_set_new(packed, "address",
-					json_string(address_string));
-		}
+		if (info.hostname)
+			json_object_set_new(packed, "hostname",
+					json_string(info.hostname));

 		if (info.username)
 			json_object_set_new(packed, "username",
 					json_string(info.username));

-		if (info.seat)
-			json_object_set_new(packed, "seat",
-					json_string(info.seat));
-
+		json_object_set_new(packed, "seat", json_string(info.seat));
 		json_array_append_new(response->data, packed);
 	}

@ -454,11 +404,6 @@ static struct cmd_response* ctl_server_dispatch_cmd(struct ctl* self,
 	nvnc_log(NVNC_LOG_INFO, "Dispatching control client command '%s'", info->name);
 	struct cmd_response* response = NULL;
 	switch (cmd->type) {
-	case CMD_ATTACH:{
-		struct cmd_attach* c = (struct cmd_attach*)cmd;
-		response = self->actions.on_attach(self, c->display);
-		break;
-		}
 	case CMD_HELP:{
 		struct cmd_help* c = (struct cmd_help*)cmd;
 		response = generate_help_object(c->id, c->id_is_command);
@ -475,9 +420,6 @@ static struct cmd_response* ctl_server_dispatch_cmd(struct ctl* self,
 		response = self->actions.on_disconnect_client(self, c->id);
 		break;
 		}
-	case CMD_DETACH:
-		response = self->actions.on_detach(self);
-		break;
 	case CMD_WAYVNC_EXIT:
 		response = self->actions.on_wayvnc_exit(self);
 		break;
@ -921,13 +863,9 @@ json_t* pack_connection_event_params(
 	char id_str[64];
 	snprintf(id_str, sizeof(id_str), "%d", info->id);

-	char address_string[256];
-	bool have_addr = sockaddr_to_string(address_string,
-			sizeof(address_string), &info->address) == 0;
-
 	return json_pack("{s:s, s:s?, s:s?, s:s?, s:i}",
 			"id", id_str,
-			"address", have_addr ? address_string : NULL,
+			"hostname", info->hostname,
 			"username", info->username,
 			"seat", info->seat,
 			"connection_count", new_connection_count);
@ -1001,20 +939,3 @@ void ctl_server_event_capture_changed(struct ctl* self,
 	ctl_server_enqueue_event(self, EVT_CAPTURE_CHANGED,
 			json_pack("{s:s}", "output", captured_output));
 }
-
-void ctl_server_event_detached(struct ctl* self)
-{
-	ctl_server_enqueue_event(self, EVT_DETACHED, json_object());
-}
-
-void ctl_server_event_output_added(struct ctl* self, const char* name)
-{
-	ctl_server_enqueue_event(self, EVT_OUTPUT_ADDED,
-			json_pack("{s:s}", "name", name));
-}
-
-void ctl_server_event_output_removed(struct ctl* self, const char* name)
-{
-	ctl_server_enqueue_event(self, EVT_OUTPUT_REMOVED,
-			json_pack("{s:s}", "name", name));
-}
--- a/src/keyboard.c
+++ b/src/keyboard.c
@ -436,18 +436,3 @@ void keyboard_feed_code(struct keyboard* self, xkb_keycode_t code,
 		send_key(self, code, is_pressed);
 	}
 }
-
-enum nvnc_keyboard_led_state keyboard_get_led_state(
-		const struct keyboard* self)
-{
-	enum nvnc_keyboard_led_state led_state = 0;
-
-	if (xkb_state_led_name_is_active(self->state, XKB_LED_NAME_SCROLL))
-		led_state |= NVNC_KEYBOARD_LED_SCROLL_LOCK;
-	if (xkb_state_led_name_is_active(self->state, XKB_LED_NAME_NUM))
-		led_state |= NVNC_KEYBOARD_LED_NUM_LOCK;
-	if (xkb_state_led_name_is_active(self->state, XKB_LED_NAME_CAPS))
-		led_state |= NVNC_KEYBOARD_LED_CAPS_LOCK;
-
-	return led_state;
-}
--- a/src/main.c
+++ b/src/main.c
--- a/src/output-management.c
+++ b/src/output-management.c
@ -1,283 +0,0 @@
-/*
- * Copyright (c) 2023 The wayvnc authors
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <neatvnc.h>
-#include <string.h>
-#include <wayland-client.h>
-
-#include "output.h"
-#include "output-management.h"
-
-#include "wlr-output-management-unstable-v1.h"
-
-struct output_manager_head {
-	struct zwlr_output_head_v1* head;
-	struct wl_list link;
-	char* name;
-	bool enabled;
-};
-
-static struct wl_list heads;
-static uint32_t last_config_serial;
-static struct zwlr_output_manager_v1* wlr_output_manager;
-
-/* single head properties */
-static void output_head_name(void* data,
-		struct zwlr_output_head_v1* output_head, const char* name)
-{
-	struct output_manager_head* head = data;
-	nvnc_trace("Got head name: %s", name);
-	free(head->name);
-	head->name = strdup(name);
-}
-
-static void output_head_description(void* data,
-		struct zwlr_output_head_v1* output_head,
-		const char* description)
-{
-	nvnc_trace("Got head description: %s", description);
-}
-
-static void output_head_physical_size(void* data,
-		struct zwlr_output_head_v1* output_head,
-		int32_t width, int32_t height)
-{
-	nvnc_trace("Got head size: %dx%d", width, height);
-}
-
-static void output_head_mode(void* data,
-		struct zwlr_output_head_v1* output_head,
-		struct zwlr_output_mode_v1* mode)
-{
-	nvnc_trace("Got head mode");
-}
-
-static void output_head_enabled(void* data,
-		struct zwlr_output_head_v1* output_head, int32_t enabled)
-{
-	nvnc_trace("Got head enabled: %s", enabled ? "yes" : "no");
-	struct output_manager_head* head = data;
-	head->enabled = !!enabled;
-}
-
-static void output_head_current_mode(void* data,
-		struct zwlr_output_head_v1* output_head,
-		struct zwlr_output_mode_v1* mode)
-{
-	nvnc_trace("Got head current mode");
-}
-
-static void output_head_position(void* data,
-		struct zwlr_output_head_v1* output_head, int32_t x, int32_t y)
-{
-	nvnc_trace("Got head position: %d,%d", x, y);
-}
-
-static void output_head_transform(void* data,
-		struct zwlr_output_head_v1* output_head, int32_t transform)
-{
-	nvnc_trace("Got head transform: %d", transform);
-}
-
-static void output_head_scale(void* data,
-		struct zwlr_output_head_v1* output_head, wl_fixed_t scale_f)
-{
-	double scale = wl_fixed_to_double(scale_f);
-	nvnc_trace("Got head scale: %.2f", scale);
-}
-
-static void output_head_finished(void* data,
-		struct zwlr_output_head_v1* output_head)
-{
-	nvnc_trace("head gone, removing");
-	struct output_manager_head* head = data;
-	zwlr_output_head_v1_destroy(output_head);
-	wl_list_remove(&head->link);
-	free(head->name);
-	head->name = NULL;
-	head->head = NULL;
-	free(head);
-}
-
-struct zwlr_output_head_v1_listener wlr_output_head_listener = {
-	.name = output_head_name,
-	.description = output_head_description,
-	.physical_size = output_head_physical_size,
-	.mode = output_head_mode,
-	.enabled = output_head_enabled,
-	.current_mode = output_head_current_mode,
-	.position = output_head_position,
-	.transform = output_head_transform,
-	.scale = output_head_scale,
-	.finished = output_head_finished,
-};
-
-/* config object */
-static void output_manager_config_succeeded(void* data,
-		struct zwlr_output_configuration_v1* config)
-{
-	nvnc_trace("config request succeeded");
-	zwlr_output_configuration_v1_destroy(config);
-}
-
-static void output_manager_config_failed(void* data,
-		struct zwlr_output_configuration_v1* config)
-{
-	nvnc_trace("config request failed");
-	zwlr_output_configuration_v1_destroy(config);
-}
-
-static void output_manager_config_cancelled(void* data,
-		struct zwlr_output_configuration_v1* config)
-{
-	nvnc_trace("config request cancelled");
-	zwlr_output_configuration_v1_destroy(config);
-}
-
-struct zwlr_output_configuration_v1_listener wlr_output_config_listener = {
-	.succeeded = output_manager_config_succeeded,
-	.failed = output_manager_config_failed,
-	.cancelled = output_manager_config_cancelled,
-};
-
-/* manager itself */
-static void output_manager_done(void* data,
-		struct zwlr_output_manager_v1* zwlr_output_manager_v1,
-		uint32_t serial)
-{
-	last_config_serial = serial;
-	nvnc_trace("Got new serial: %u", serial);
-}
-
-static void output_manager_finished(void* data,
-		struct zwlr_output_manager_v1* zwlr_output_manager_v1)
-{
-	nvnc_trace("output-manager destroyed");
-	wlr_output_manager = NULL;
-}
-
-static void output_manager_head(void* data,
-		struct zwlr_output_manager_v1* zwlr_output_manager_v1,
-		struct zwlr_output_head_v1* output_head)
-{
-	struct output_manager_head* head = calloc(1, sizeof(*head));
-	if (!head) {
-		nvnc_log(NVNC_LOG_ERROR, "OOM");
-		return;
-	}
-
-	head->head = output_head;
-	wl_list_insert(heads.prev, &head->link);
-	nvnc_trace("New head, now at %lu", wl_list_length(&heads));
-
-	zwlr_output_head_v1_add_listener(head->head,
-		&wlr_output_head_listener, head);
-}
-
-static const struct zwlr_output_manager_v1_listener
-		wlr_output_manager_listener = {
-	.head = output_manager_head,
-	.done = output_manager_done,
-	.finished = output_manager_finished,
-};
-
-/* Public API */
-void wlr_output_manager_setup(struct zwlr_output_manager_v1* output_manager)
-{
-	if (wlr_output_manager)
-		return;
-
-	wl_list_init(&heads);
-	wlr_output_manager = output_manager;
-	zwlr_output_manager_v1_add_listener(wlr_output_manager,
-			&wlr_output_manager_listener, NULL);
-}
-
-void wlr_output_manager_destroy(void)
-{
-	if (!wlr_output_manager)
-		return;
-
-	struct output_manager_head* head;
-	struct output_manager_head* tmp;
-	wl_list_for_each_safe(head, tmp, &heads, link) {
-		wl_list_remove(&head->link);
-		free(head->name);
-		free(head);
-	}
-
-	zwlr_output_manager_v1_destroy(wlr_output_manager);
-	wlr_output_manager = NULL;
-
-	last_config_serial = 0;
-}
-
-bool wlr_output_manager_resize_output(struct output* output,
-		uint16_t width, uint16_t height)
-{
-	if (!wlr_output_manager) {
-		nvnc_log(NVNC_LOG_INFO,
-			"output-management protocol not available, not resizing output");
-		return false;
-	}
-
-	if (!output->is_headless) {
-		nvnc_log(NVNC_LOG_INFO,
-			"not resizing output %s: not a headless one",
-			output->name);
-		return false;
-	}
-
-	// TODO: This could be synced to --max-fps
-	int refresh_rate = 0;
-
-	struct zwlr_output_configuration_v1* config;
-	struct zwlr_output_configuration_head_v1* config_head;
-
-	config = zwlr_output_manager_v1_create_configuration(
-		wlr_output_manager, last_config_serial);
-	zwlr_output_configuration_v1_add_listener(config,
-			&wlr_output_config_listener, NULL);
-
-	struct output_manager_head* head;
-	wl_list_for_each(head, &heads, link) {
-		if (!head->enabled) {
-			nvnc_trace("disabling output %s", head->name);
-			zwlr_output_configuration_v1_disable_head(
-				config, head->head);
-			continue;
-		}
-
-		config_head = zwlr_output_configuration_v1_enable_head(
-			config, head->head);
-		if (head->name && strcmp(head->name, output->name) == 0) {
-			nvnc_trace("reconfiguring output %s", head->name);
-			zwlr_output_configuration_head_v1_set_custom_mode(
-				config_head, width, height, refresh_rate);
-
-			/* It doesn't make any sense to have rotation on a
-			 * headless display, so we set the transform here to be
-			 * sure.
-			 */
-			zwlr_output_configuration_head_v1_set_transform(
-					config_head, WL_OUTPUT_TRANSFORM_NORMAL);
-		}
-	}
-
-	nvnc_trace("applying new output config");
-	zwlr_output_configuration_v1_apply(config);
-	return true;
-}
--- a/src/output.c
+++ b/src/output.c
@ -219,12 +219,7 @@ void output_name(void* data, struct zxdg_output_v1* xdg_output,
 	struct output* self = data;

 	strlcpy(self->name, name, sizeof(self->name));
-	self->is_headless =
-		(strncmp(name, "HEADLESS-", strlen("HEADLESS-")) == 0) ||
-		(strncmp(name, "NOOP-", strlen("NOOP-")) == 0);
-
-	nvnc_trace("Output %u name: %s, headless: %s", self->id, self->name,
-		self->is_headless ? "yes" : "no");
+	nvnc_trace("Output %u name: %s", self->id, self->name);
 }

 void output_description(void* data, struct zxdg_output_v1* xdg_output,
--- a/src/pam_auth.c
+++ b/src/pam_auth.c
@ -30,7 +30,7 @@ static int pam_return_pwd(int num_msg, const struct pam_message** msgm,
                          struct pam_response** response, void* appdata_ptr)
 {
 	struct credentials* cred = appdata_ptr;
-	struct pam_response* resp = calloc(num_msg, sizeof(*resp));
+	struct pam_response* resp = calloc(sizeof(*response), num_msg);
 	for (int i = 0; i < num_msg; i++) {
 		resp[i].resp_retcode = PAM_SUCCESS;
 		switch(msgm[i]->msg_style) {
--- a/src/pixels.c
+++ b/src/pixels.c
@ -44,40 +44,3 @@ uint32_t fourcc_from_wl_shm(enum wl_shm_format in)

 	return in;
 }
-
-int pixel_size_from_fourcc(uint32_t fourcc)
-{
-	switch (fourcc & ~DRM_FORMAT_BIG_ENDIAN) {
-	case DRM_FORMAT_RGBA1010102:
-	case DRM_FORMAT_RGBX1010102:
-	case DRM_FORMAT_BGRA1010102:
-	case DRM_FORMAT_BGRX1010102:
-	case DRM_FORMAT_ARGB2101010:
-	case DRM_FORMAT_XRGB2101010:
-	case DRM_FORMAT_ABGR2101010:
-	case DRM_FORMAT_XBGR2101010:
-	case DRM_FORMAT_RGBA8888:
-	case DRM_FORMAT_RGBX8888:
-	case DRM_FORMAT_BGRA8888:
-	case DRM_FORMAT_BGRX8888:
-	case DRM_FORMAT_ARGB8888:
-	case DRM_FORMAT_XRGB8888:
-	case DRM_FORMAT_ABGR8888:
-	case DRM_FORMAT_XBGR8888:
-		return 4;
-	case DRM_FORMAT_BGR888:
-	case DRM_FORMAT_RGB888:
-		return 3;
-	case DRM_FORMAT_RGBA4444:
-	case DRM_FORMAT_RGBX4444:
-	case DRM_FORMAT_BGRA4444:
-	case DRM_FORMAT_BGRX4444:
-	case DRM_FORMAT_ARGB4444:
-	case DRM_FORMAT_XRGB4444:
-	case DRM_FORMAT_ABGR4444:
-	case DRM_FORMAT_XBGR4444:
-		return 2;
-	}
-
-	return 0;
-}
--- a/src/screencopy.c
+++ b/src/screencopy.c
@ -298,8 +298,5 @@ void screencopy_destroy(struct screencopy* self)
 	if (self->front)
 		wv_buffer_pool_release(self->pool, self->front);

-	self->back = NULL;
-	self->front = NULL;
-
 	wv_buffer_pool_destroy(self->pool);
 }
--- a/src/seat.c
+++ b/src/seat.c
@ -97,17 +97,6 @@ struct seat* seat_find_by_id(struct wl_list* list, uint32_t id)
 	return NULL;
 }

-struct seat* seat_find_unoccupied(struct wl_list* list)
-{
-	struct seat* seat;
-
-	wl_list_for_each(seat, list, link)
-		if (seat->occupancy == 0)
-			return seat;
-
-	return NULL;
-}
-
 struct seat* seat_first(struct wl_list* list)
 {
 	struct seat* seat;
--- a/src/util.c
+++ b/src/util.c
@ -23,7 +23,9 @@
 #include "util.h"

 const char* wayvnc_version =
-#if defined(PROJECT_VERSION)
+#if defined(GIT_VERSION)
+		GIT_VERSION;
+#elif defined(PROJECT_VERSION)
 		PROJECT_VERSION;
 #else
 		"UNKNOWN";
--- a/test/integration/integration.sh
+++ b/test/integration/integration.sh
@ -377,4 +377,4 @@ multioutput_test() {
 }

 smoke_test
-#multioutput_test
+multioutput_test
--- a/util/valgrind.sh
+++ b/util/valgrind.sh
@ -1,8 +1,6 @@
-#!/bin/bash
-
-SCRIPT_DIR="$(dirname "$(readlink -f "$0")")"
+#!/bin/sh

 valgrind --leak-check=full \
 	--show-leak-kinds=all \
-	--suppressions=$SCRIPT_DIR/valgrind.supp \
+	--suppressions=util/valgrind.supp \
 	$@
--- a/wayvnc.scd
+++ b/wayvnc.scd
@ -52,9 +52,6 @@ wayvnc - A VNC server for wlroots based Wayland compositors.
 *-v,--verbose*
 	Be more verbose. Same as setting `--log-level=info`.

-*-w,--websocket*
-	Create a websocket.
-
 *-L,--log-level*
 	Set log level. The levels are: error, warning, info, debug, trace and
 	quiet.
@ -114,24 +111,13 @@ considered to be part of the key or the value.
 *port*
 	The port to which the server shall bind. Default is 5900.

-*private_key_file_file*
-	The path to the private key file for TLS encryption. Only applicable
-	when *enable_auth*=true.
-
-*relax_encryption*
-	Don't require encryption after the user has been authenticated. This
-	enables some security types such as Apple Diffie-Hellman.
-
-*rsa_private_key_file*
-	The path to the private key file for RSA-AES encryption. Only applicable
-	when *enable_auth*=true.
+*private_key_file*
+	The path to the private key file for encryption. Only applicable when
+	*enable_auth*=true.

 *username*
 	Choose a username for authentication.

-*use_relative_paths*
-	Make file paths relative to the location of the config file.
-
 *xkb_layout*
 	The keyboard layout to use for key code lookup.

@ -162,14 +148,12 @@ considered to be part of the key or the value.
 ## EXAMPLE

 ```
-use_relative_paths=true
 address=0.0.0.0
 enable_auth=true
 username=luser
 password=p455w0rd
-rsa_private_key_file=rsa_key.pem
-private_key_file=tls_key.pem
-certificate_file=tls_cert.pem
+private_key_file=/path/to/key.pem
+certificate_file=/path/to/cert.pem
 ```

 # WAYVNCCTL CONTROL SOCKET
@ -269,8 +253,8 @@ Parameters:
 *connection_count=...*
 	The total number of connected VNC clients including this one.

-*address=...*
-	The IP address of this client. May be null.
+*hostname=...*
+	The hostname or IP of this client. May be null.

 *username=...*
 	The username used to authenticate this client. May be null.
@ -288,8 +272,8 @@ Parameters:
 *connection_count=...*
 	The total number of connected VNC clients not including this one.

-*address=...*
-	The IP address of this client. May be null.
+*hostname=...*
+	The hostname or IP of this client. May be null.

 *username=...*
 	The username used to authenticate this client. May be null.
--- a/wayvncctl.scd
+++ b/wayvncctl.scd
@ -63,8 +63,8 @@ the end, for ease in scripting:

 ```
 $ wayvncctl --json event-receive
-{"method":"client-connected","params":{"id":"0x10ef670","address":null,"username":null,"connection_count":1}}
-{"method":"client-disconnected","params":{"id":"0x10ef670","address":null,"username":null,"connection_count":0}}
+{"method":"client-connected","params":{"id":"0x10ef670","hostname":null,"username":null,"connection_count":1}}
+{"method":"client-disconnected","params":{"id":"0x10ef670","hostname":null,"username":null,"connection_count":0}}
 ```

 The default human-readible output is a multi-line yaml-like format, with two
@ -75,12 +75,12 @@ $ wayvncctl event-receive

 client-connected:
  id: 0x10ef670
-  address: 192.168.1.18
+  hostname: 192.168.1.18
  connection_count: 1

 client-disconnected:
  id: 0x10ef670
-  address: 192.168.1.18
+  hostname: 192.168.1.18
  connection_count: 0

 ```
Author	SHA1	Message	Date
Andri Yngvason	b927394490	Add seat name to client-connected event	2023-03-27 21:19:23 +00:00
Andri Yngvason	c302c20939	Remove unnecessary copying when listing clients	2023-03-25 13:08:15 +00:00
Andri Yngvason	842da93de4	Iterate over clients instead of listing This model avoids memory allocations and allows for re-use of the info function for client events.	2023-03-25 12:57:24 +00:00
Andri Yngvason	0414e1fd87	Show seat in client list	2023-03-25 10:33:16 +00:00
Andri Yngvason	75173ea838	main: Increase access to per-client seats	2023-03-25 10:30:31 +00:00
Andri Yngvason	1ef290d2d4	Implement ext-transient-seat-v1	2023-03-23 22:04:05 +00:00