diff --git a/l10n/cs.js b/l10n/cs.js
index be0a1fe4..1ccf30ec 100644
--- a/l10n/cs.js
+++ b/l10n/cs.js
@@ -3,6 +3,27 @@ OC.L10N.register(
     {
     "Memories" : "Vzpomínky",
     "Fast, modern and advanced photo management suite" : "Rychlá, moderní sada pro správu fotek s pokročilými funkcemi",
+    "Path to packaged exiftool binary" : "Popis umístění přibaleného spustitelného souboru s exiftool",
+    "ffmpeg path" : "popis umístění ffmpeg",
+    "ffprobe path" : "popis umístění ffprobe",
+    "Binary path (local only)" : "Popis umístění spustitelného souboru (pouze lokální)",
+    "Bind address (local only)" : "Adresa, na kterou navázat (pouze místní)",
+    "Connection address (same as bind if local)" : "Adresa pro připojení (pokud lokální, stejná jako ta pro navázání na)",
+    "EXIF Extraction" : "Získávání EXIF metadat",
+    "Use system perl (only if packaged binary does not work)" : "Použít perl ze systému (pouze pokud s přibaleným spustitelným souborem nefunguje)",
+    "Reverse Geocoding" : "Obrácené geokódování",
+    "Database is populated with {n} geometries" : "Databáze je osazena {n} geometriemi",
+    "Geometry table has not been created" : "Tabulka geometrie nebyla vytvořena",
+    "Reverse geocoding has not been configured ({gisType})." : "Obrácené geokódování nebylo nastaveno ({gisType}).",
+    "Memories supports offline reverse geocoding using the OpenStreetMaps data on MySQL and Postgres." : "Memories podporuje obrácené geokódování, přičemž k tomu nepoužívá služby na Internetu (soukromí). Je založeno na datech z OpenStreetMaps (ukládaných v MySQL či Postgres).",
+    "You need to download the planet data into your database. This is highly recommended and has low overhead." : "Je třeba stáhnout si geografická data do databáze. Je to velmi doporučováno a má nízkou režii.",
+    "If the button below does not work for importing the planet data, use " : "Pokud níže uvedené tlačítko pro import geografických dat nezafunguje, použijte",
+    "Note: the geometry data is stored in the " : "Pozn.: data o geometrii jsou uložena v",
+    "Download planet database" : "Stáhnout si geografickou databázi",
+    "Video Streaming" : "Proudové vysílání videa",
+    "Live transcoding provides for adaptive streaming of videos using HLS." : "Živé překódovávání poskytuje adaptivní proudové vysílání videí pomocí HLS.",
+    "Note that this may be very CPU intensive without hardware acceleration, and transcoding will not be used for external storage." : "Mějte na paměti, že nebude použito v případě externích úložiště. Dále také, pokud není k dispozici hardwarová akcelerace, toto může velmi silně vytěžovat procesor.",
+    "Enable Transcoding" : "Zapnout překódovávání",
     "Settings" : "Nastavení",
     "People (Recognize)" : "Lidé (rozpoznání)",
     "People" : "Lidé",
diff --git a/l10n/cs.json b/l10n/cs.json
index 1b8223d2..2f3925ad 100644
--- a/l10n/cs.json
+++ b/l10n/cs.json
@@ -1,6 +1,27 @@
 { "translations": {
     "Memories" : "Vzpomínky",
     "Fast, modern and advanced photo management suite" : "Rychlá, moderní sada pro správu fotek s pokročilými funkcemi",
+    "Path to packaged exiftool binary" : "Popis umístění přibaleného spustitelného souboru s exiftool",
+    "ffmpeg path" : "popis umístění ffmpeg",
+    "ffprobe path" : "popis umístění ffprobe",
+    "Binary path (local only)" : "Popis umístění spustitelného souboru (pouze lokální)",
+    "Bind address (local only)" : "Adresa, na kterou navázat (pouze místní)",
+    "Connection address (same as bind if local)" : "Adresa pro připojení (pokud lokální, stejná jako ta pro navázání na)",
+    "EXIF Extraction" : "Získávání EXIF metadat",
+    "Use system perl (only if packaged binary does not work)" : "Použít perl ze systému (pouze pokud s přibaleným spustitelným souborem nefunguje)",
+    "Reverse Geocoding" : "Obrácené geokódování",
+    "Database is populated with {n} geometries" : "Databáze je osazena {n} geometriemi",
+    "Geometry table has not been created" : "Tabulka geometrie nebyla vytvořena",
+    "Reverse geocoding has not been configured ({gisType})." : "Obrácené geokódování nebylo nastaveno ({gisType}).",
+    "Memories supports offline reverse geocoding using the OpenStreetMaps data on MySQL and Postgres." : "Memories podporuje obrácené geokódování, přičemž k tomu nepoužívá služby na Internetu (soukromí). Je založeno na datech z OpenStreetMaps (ukládaných v MySQL či Postgres).",
+    "You need to download the planet data into your database. This is highly recommended and has low overhead." : "Je třeba stáhnout si geografická data do databáze. Je to velmi doporučováno a má nízkou režii.",
+    "If the button below does not work for importing the planet data, use " : "Pokud níže uvedené tlačítko pro import geografických dat nezafunguje, použijte",
+    "Note: the geometry data is stored in the " : "Pozn.: data o geometrii jsou uložena v",
+    "Download planet database" : "Stáhnout si geografickou databázi",
+    "Video Streaming" : "Proudové vysílání videa",
+    "Live transcoding provides for adaptive streaming of videos using HLS." : "Živé překódovávání poskytuje adaptivní proudové vysílání videí pomocí HLS.",
+    "Note that this may be very CPU intensive without hardware acceleration, and transcoding will not be used for external storage." : "Mějte na paměti, že nebude použito v případě externích úložiště. Dále také, pokud není k dispozici hardwarová akcelerace, toto může velmi silně vytěžovat procesor.",
+    "Enable Transcoding" : "Zapnout překódovávání",
     "Settings" : "Nastavení",
     "People (Recognize)" : "Lidé (rozpoznání)",
     "People" : "Lidé",
diff --git a/l10n/de_DE.js b/l10n/de_DE.js
index 12826f9f..87f0d8e7 100644
--- a/l10n/de_DE.js
+++ b/l10n/de_DE.js
@@ -4,6 +4,64 @@ OC.L10N.register(
     "Memories" : "Erinnerungen",
     "Fast, modern and advanced photo management suite" : "Schnelle, moderne und fortschrittliche Fotoverwaltungssuite",
     "# Memories: Photo Management for Nextcloud\n\nMemories is a *batteries-included* photo management solution for Nextcloud with advanced features including:\n\n- **📸 Timeline**: Sort photos and videos by date taken, parsed from Exif data.\n- **⏪ Rewind**: Jump to any time in the past instantly and relive your memories.\n- **🤖 AI Tagging**: Group photos by people and objects, powered by [recognize](https://github.com/nextcloud/recognize) and [facerecognition](https://github.com/matiasdelellis/facerecognition).\n- **🖼️ Albums**: Create albums to group photos and videos together. Then share these albums with others.\n- **🫱🏻‍🫲🏻 External Sharing**: Share photos and videos with people outside of your Nextcloud instance.\n- **📱 Mobile Support**: Work from any device, of any shape and size through the web app.\n- **✏️ Edit Metadata**: Edit dates and other metadata on photos quickly and in bulk.\n- **📦 Archive**: Store photos you don't want to see in your timeline in a separate folder.\n- **📹 Video Transcoding**: Transcode videos and use HLS for maximal performance.\n- **🗺️ Map**: View your photos on a map, tagged with accurate reverse geocoding.\n- **📦 Migration**: Migrate easily from Nextcloud Photos and Google Takeout.\n- **⚡️ Performance**: Do all this very fast.\n\n## 🚀 Installation\n\n1. Install the app from the Nextcloud app store (try a demo [here](https://memories-demo.radialapps.com/apps/memories/)).\n1. Perform the recommended [configuration steps](https://github.com/pulsejet/memories/wiki/Configuration).\n1. Run `php occ memories:index` to generate metadata indices for existing photos.\n1. Open the 📷 Memories app in Nextcloud and set the directory containing your photos." : "# Erinnerungen: Fotoverwaltung für Nextcloud\n\nErinnerungen (Memories) ist eine Fotoverwaltungslösung *Batterien enthalten* für Nextcloud mit erweiterten Funktionen, darunter:\n\n- **📸 Timeline**: Fotos und Videos nach Aufnahmedatum sortieren, geparst aus Exif-Daten.\n- **⏪ Zurückspulen**: Springen Sie sofort zu einem beliebigen Zeitpunkt in der Vergangenheit und erleben Sie Ihre Erinnerungen erneut.\n- **🤖 KI-Tagging**: Gruppieren Sie Fotos nach Personen und Objekten, unterstützt von [recognize](https://github.com/nextcloud/recognize) und [facerecognition](https://github.com/matiasdelellis/facerecognition ).\n- **🖼️ Alben**: Erstellen Sie Alben, um Fotos und Videos zu gruppieren. Dann teilen Sie diese Alben mit anderen.\n- **🫱🏻‍🫲🏻 Externes Teilen**: Teilen Sie Fotos und Videos mit Personen außerhalb Ihrer Nextcloud-Instanz.\n- **📱 Mobiler Support**: Arbeiten Sie von jedem Gerät jeder Form und Größe über die Web-App.\n- **✏️ Metadaten bearbeiten**: Bearbeiten Sie Daten und andere Metadaten auf Fotos schnell und in großen Mengen.\n- **📦 Archiv**: Speichern Sie Fotos, die Sie nicht in Ihrer Chronik sehen möchten, in einem separaten Ordner.\n- **📹 Videotranskodierung**: Videos transkodieren und HLS für maximale Leistung verwenden.\n- **🗺️ Karte**: Zeigen Sie Ihre Fotos auf einer Karte an, die mit genauer umgekehrter Geokodierung versehen ist.\n- **📦 Migration**: Migrieren Sie einfach von Nextcloud Photos und Google Takeout.\n- **⚡️ Leistung**: Mach das alles sehr schnell.\n\n## 🚀 Installation\n\n1. Installieren Sie die App aus dem Nextcloud App Store (probieren Sie [hier] eine Demo aus (https://memories-demo.radialapps.com/apps/memories/)).\n1. Führen Sie die empfohlenen [Konfigurationsschritte] durch (https://github.com/pulsejet/memories/wiki/Configuration).\n1. Führen Sie `php occ memorys:index` aus, um Metadaten-Indizes für vorhandene Fotos zu generieren.\n1. Öffnen Sie die App 📷 Erinnerungen in Nextcloud und legen Sie das Verzeichnis mit Ihren Fotos fest.",
+    "Path to packaged exiftool binary" : "Pfad zur gepackten Exiftool-Binärdatei",
+    "ffmpeg path" : "ffmpeg-Pfad",
+    "ffprobe path" : "ffprobe-Pfad",
+    "Binary path (local only)" : "Binärer Pfad (nur lokal)",
+    "Bind address (local only)" : "Bind-Adresse (nur lokal)",
+    "Connection address (same as bind if local)" : "Verbindungsadresse (dasselbe wie bind, wenn lokal)",
+    "EXIF Extraction" : "EXIF-Extraktion",
+    "Use system perl (only if packaged binary does not work)" : "System-Perl verwenden (nur wenn gepackte Binärdatei nicht funktioniert)",
+    "Reverse Geocoding" : "Umgekehrte Geokodierung",
+    "Database is populated with {n} geometries" : "Die Datenbank ist mit {n} Geometrien gefüllt",
+    "Geometry table has not been created" : "Geometrietabelle wurde nicht erstellt",
+    "Reverse geocoding has not been configured ({gisType})." : "Umgekehrte Geocodierung wurde nicht konfiguriert ({gisType}).",
+    "Memories supports offline reverse geocoding using the OpenStreetMaps data on MySQL and Postgres." : "Erinnerungen (Memories) unterstützt lokale umgekehrte Geocodierung unter Verwendung der OpenStreetMaps-Daten auf MySQL und Postgres.",
+    "You need to download the planet data into your database. This is highly recommended and has low overhead." : "Sie müssen die Planetendaten in Ihre Datenbank herunterladen. Dies ist sehr zu empfehlen und hat einen geringen Overhead.",
+    "If the button below does not work for importing the planet data, use " : "Wenn die Schaltfläche unten zum Importieren der Planetendaten nicht funktioniert, verwenden Sie",
+    "Note: the geometry data is stored in the " : "Hinweis: Die Geometriedaten werden gespeichert in",
+    "Download planet database" : "Planetendatenbank herunterladen",
+    "Video Streaming" : "Video-Streaming",
+    "Live transcoding provides for adaptive streaming of videos using HLS." : "Live-Transcodierung ermöglicht adaptives Streaming von Videos mit HLS.",
+    "Note that this may be very CPU intensive without hardware acceleration, and transcoding will not be used for external storage." : "Beachten Sie, dass dies ohne Hardwarebeschleunigung sehr CPU-intensiv sein kann und die Transcodierung nicht für die externe Speicherung verwendet wird.",
+    "Enable Transcoding" : "Transcodierung aktivieren",
+    "Global default video quality (user may override)" : "Globale Standard-Videoqualität (Benutzer kann diese überschreiben)",
+    "Auto (adaptive transcode)" : "Automatisch (adaptive Transcodierung)",
+    "Original (transcode with max quality)" : "Original (mit maximaler Qualität transcodieren)",
+    "Direct (original video file without transcode)" : "Direkt (Originalvideodatei ohne Transcodierung)",
+    "Transcoder configuration" : "Transcoder-Konfiguration",
+    "Memories uses the go-vod transcoder. You can run go-vod exernally (e.g. in a separate Docker container for hardware acceleration) or use the built-in transcoder. To use an external transcoder, enable the following option and follow the instructions at this link:" : "Erinnerungen (Memories) verwendet den Go-Vod-Transcoder. Sie können go-vod extern ausführen (z. B. in einem separaten Docker-Container zur Hardwarebeschleunigung) oder den integrierten Transcoder verwenden. Um einen externen Transcoder zu verwenden, aktivieren Sie die folgende Option und folgen Sie den Anweisungen unter diesem Link:",
+    "external transcoder configuration" : "Externe Transcoder-Konfiguration",
+    "Enable external transcoder (go-vod)" : "Externen Transcoder aktivieren (go-vod)",
+    "Hardware Acceleration" : "Hardware-Beschleunigung",
+    "You must first make sure the correct drivers are installed before configuring acceleration." : "Sie müssen zunächst sicherstellen, dass die richtigen Treiber installiert sind, bevor Sie die Beschleunigung konfigurieren.",
+    "Make sure you test hardware acceleration with various options after enabling." : "Stellen Sie sicher, dass Sie die Hardwarebeschleunigung nach der Aktivierung mit verschiedenen Optionen testen.",
+    "Do not enable multiple types of hardware acceleration simultaneously." : "Aktivieren Sie nicht mehrere Arten der Hardwarebeschleunigung gleichzeitig.",
+    "Intel processors supporting QuickSync Video (QSV) as well as some AMD GPUs can be used for transcoding using VA-API acceleration." : "Intel-Prozessoren, die QuickSync Video (QSV) unterstützen, sowie einige AMD-GPUs können für die Transcodierung mit VA-API-Beschleunigung verwendet werden.",
+    "For more details on driver installation, check the following link:" : "Weitere Einzelheiten zur Treiberinstallation finden Sie unter folgendem Link:",
+    "Enable acceleration with VA-API" : "Beschleunigung mit VA-API aktivieren",
+    "Enable low-power mode (QSV)" : "Energiesparmodus (QSV) aktivieren",
+    "NVIDIA GPUs can be used for transcoding using the NVENC encoder with the proper drivers." : "NVIDIA-GPUs können für die Transcodierung mit dem NVENC-Encoder mit den richtigen Treibern verwendet werden.",
+    "Depending on the versions of the installed SDK and ffmpeg, you need to specify the scaler to use" : "Abhängig von den Versionen des installierten SDK und ffmpeg müssen Sie den zu verwendenden Scaler angeben",
+    "No automated tests are available for NVIDIA acceleration." : "Für die NVIDIA-Beschleunigung sind keine automatisierten Tests verfügbar.",
+    "Enable acceleration with NVENC" : "Beschleunigung mit NVENC aktivieren",
+    "Enable NVENC Temporal AQ" : "NVENC Temporal AQ aktivieren",
+    "NPP scaler" : "NPP-Scaler",
+    "CUDA scaler" : "CUDA-Scaler",
+    "Failed to update setting" : "Die Einstellung konnte nicht aktualisiert werden",
+    "{name} binary exists and is executable" : "{name}-Binärdatei existiert und ist ausführbar",
+    "{name} binary not found" : "{name}-Binärdatei nicht gefunden",
+    "{name} binary is not executable" : "{name}-Binärdatei ist nicht ausführbar",
+    "{name} failed test: {info}" : "{name} Test nicht bestanden: {info}",
+    "{name} binary exists and is usable" : "{name}-Binärdatei existiert und kann verwendet werden",
+    "{name} binary status: {status}" : "{Name} binärer Status: {Status}",
+    "Geometry support was not detected in your database" : "Geometrieunterstützung wurde in Ihrer Datenbank nicht erkannt",
+    "MySQL-like geometry support was detected " : "MySQL-ähnliche Geometrieunterstützung wurde erkannt",
+    "Postgres native geometry support was detected" : "Die native Postgres-Geometrieunterstützung wurde erkannt",
+    "VA-API device ({dev}) is readable" : "VA-API-Gerät ({dev}) ist lesbar",
+    "VA-API device ({dev}) not found" : "VA-API-Gerät ({dev}) nicht gefunden",
+    "VA-API device ({dev}) has incorrect permissions" : "VA-API-Gerät ({dev}) hat falsche Berechtigungen",
+    "VA-API device status: {status}" : "VA-API-Gerätestatus: {status}",
     "Settings" : "Einstellungen",
     "People (Recognize)" : "Personen (erkennen)",
     "People" : "Personen",
diff --git a/l10n/de_DE.json b/l10n/de_DE.json
index 6bbefec8..1e85968c 100644
--- a/l10n/de_DE.json
+++ b/l10n/de_DE.json
@@ -2,6 +2,64 @@
     "Memories" : "Erinnerungen",
     "Fast, modern and advanced photo management suite" : "Schnelle, moderne und fortschrittliche Fotoverwaltungssuite",
     "# Memories: Photo Management for Nextcloud\n\nMemories is a *batteries-included* photo management solution for Nextcloud with advanced features including:\n\n- **📸 Timeline**: Sort photos and videos by date taken, parsed from Exif data.\n- **⏪ Rewind**: Jump to any time in the past instantly and relive your memories.\n- **🤖 AI Tagging**: Group photos by people and objects, powered by [recognize](https://github.com/nextcloud/recognize) and [facerecognition](https://github.com/matiasdelellis/facerecognition).\n- **🖼️ Albums**: Create albums to group photos and videos together. Then share these albums with others.\n- **🫱🏻‍🫲🏻 External Sharing**: Share photos and videos with people outside of your Nextcloud instance.\n- **📱 Mobile Support**: Work from any device, of any shape and size through the web app.\n- **✏️ Edit Metadata**: Edit dates and other metadata on photos quickly and in bulk.\n- **📦 Archive**: Store photos you don't want to see in your timeline in a separate folder.\n- **📹 Video Transcoding**: Transcode videos and use HLS for maximal performance.\n- **🗺️ Map**: View your photos on a map, tagged with accurate reverse geocoding.\n- **📦 Migration**: Migrate easily from Nextcloud Photos and Google Takeout.\n- **⚡️ Performance**: Do all this very fast.\n\n## 🚀 Installation\n\n1. Install the app from the Nextcloud app store (try a demo [here](https://memories-demo.radialapps.com/apps/memories/)).\n1. Perform the recommended [configuration steps](https://github.com/pulsejet/memories/wiki/Configuration).\n1. Run `php occ memories:index` to generate metadata indices for existing photos.\n1. Open the 📷 Memories app in Nextcloud and set the directory containing your photos." : "# Erinnerungen: Fotoverwaltung für Nextcloud\n\nErinnerungen (Memories) ist eine Fotoverwaltungslösung *Batterien enthalten* für Nextcloud mit erweiterten Funktionen, darunter:\n\n- **📸 Timeline**: Fotos und Videos nach Aufnahmedatum sortieren, geparst aus Exif-Daten.\n- **⏪ Zurückspulen**: Springen Sie sofort zu einem beliebigen Zeitpunkt in der Vergangenheit und erleben Sie Ihre Erinnerungen erneut.\n- **🤖 KI-Tagging**: Gruppieren Sie Fotos nach Personen und Objekten, unterstützt von [recognize](https://github.com/nextcloud/recognize) und [facerecognition](https://github.com/matiasdelellis/facerecognition ).\n- **🖼️ Alben**: Erstellen Sie Alben, um Fotos und Videos zu gruppieren. Dann teilen Sie diese Alben mit anderen.\n- **🫱🏻‍🫲🏻 Externes Teilen**: Teilen Sie Fotos und Videos mit Personen außerhalb Ihrer Nextcloud-Instanz.\n- **📱 Mobiler Support**: Arbeiten Sie von jedem Gerät jeder Form und Größe über die Web-App.\n- **✏️ Metadaten bearbeiten**: Bearbeiten Sie Daten und andere Metadaten auf Fotos schnell und in großen Mengen.\n- **📦 Archiv**: Speichern Sie Fotos, die Sie nicht in Ihrer Chronik sehen möchten, in einem separaten Ordner.\n- **📹 Videotranskodierung**: Videos transkodieren und HLS für maximale Leistung verwenden.\n- **🗺️ Karte**: Zeigen Sie Ihre Fotos auf einer Karte an, die mit genauer umgekehrter Geokodierung versehen ist.\n- **📦 Migration**: Migrieren Sie einfach von Nextcloud Photos und Google Takeout.\n- **⚡️ Leistung**: Mach das alles sehr schnell.\n\n## 🚀 Installation\n\n1. Installieren Sie die App aus dem Nextcloud App Store (probieren Sie [hier] eine Demo aus (https://memories-demo.radialapps.com/apps/memories/)).\n1. Führen Sie die empfohlenen [Konfigurationsschritte] durch (https://github.com/pulsejet/memories/wiki/Configuration).\n1. Führen Sie `php occ memorys:index` aus, um Metadaten-Indizes für vorhandene Fotos zu generieren.\n1. Öffnen Sie die App 📷 Erinnerungen in Nextcloud und legen Sie das Verzeichnis mit Ihren Fotos fest.",
+    "Path to packaged exiftool binary" : "Pfad zur gepackten Exiftool-Binärdatei",
+    "ffmpeg path" : "ffmpeg-Pfad",
+    "ffprobe path" : "ffprobe-Pfad",
+    "Binary path (local only)" : "Binärer Pfad (nur lokal)",
+    "Bind address (local only)" : "Bind-Adresse (nur lokal)",
+    "Connection address (same as bind if local)" : "Verbindungsadresse (dasselbe wie bind, wenn lokal)",
+    "EXIF Extraction" : "EXIF-Extraktion",
+    "Use system perl (only if packaged binary does not work)" : "System-Perl verwenden (nur wenn gepackte Binärdatei nicht funktioniert)",
+    "Reverse Geocoding" : "Umgekehrte Geokodierung",
+    "Database is populated with {n} geometries" : "Die Datenbank ist mit {n} Geometrien gefüllt",
+    "Geometry table has not been created" : "Geometrietabelle wurde nicht erstellt",
+    "Reverse geocoding has not been configured ({gisType})." : "Umgekehrte Geocodierung wurde nicht konfiguriert ({gisType}).",
+    "Memories supports offline reverse geocoding using the OpenStreetMaps data on MySQL and Postgres." : "Erinnerungen (Memories) unterstützt lokale umgekehrte Geocodierung unter Verwendung der OpenStreetMaps-Daten auf MySQL und Postgres.",
+    "You need to download the planet data into your database. This is highly recommended and has low overhead." : "Sie müssen die Planetendaten in Ihre Datenbank herunterladen. Dies ist sehr zu empfehlen und hat einen geringen Overhead.",
+    "If the button below does not work for importing the planet data, use " : "Wenn die Schaltfläche unten zum Importieren der Planetendaten nicht funktioniert, verwenden Sie",
+    "Note: the geometry data is stored in the " : "Hinweis: Die Geometriedaten werden gespeichert in",
+    "Download planet database" : "Planetendatenbank herunterladen",
+    "Video Streaming" : "Video-Streaming",
+    "Live transcoding provides for adaptive streaming of videos using HLS." : "Live-Transcodierung ermöglicht adaptives Streaming von Videos mit HLS.",
+    "Note that this may be very CPU intensive without hardware acceleration, and transcoding will not be used for external storage." : "Beachten Sie, dass dies ohne Hardwarebeschleunigung sehr CPU-intensiv sein kann und die Transcodierung nicht für die externe Speicherung verwendet wird.",
+    "Enable Transcoding" : "Transcodierung aktivieren",
+    "Global default video quality (user may override)" : "Globale Standard-Videoqualität (Benutzer kann diese überschreiben)",
+    "Auto (adaptive transcode)" : "Automatisch (adaptive Transcodierung)",
+    "Original (transcode with max quality)" : "Original (mit maximaler Qualität transcodieren)",
+    "Direct (original video file without transcode)" : "Direkt (Originalvideodatei ohne Transcodierung)",
+    "Transcoder configuration" : "Transcoder-Konfiguration",
+    "Memories uses the go-vod transcoder. You can run go-vod exernally (e.g. in a separate Docker container for hardware acceleration) or use the built-in transcoder. To use an external transcoder, enable the following option and follow the instructions at this link:" : "Erinnerungen (Memories) verwendet den Go-Vod-Transcoder. Sie können go-vod extern ausführen (z. B. in einem separaten Docker-Container zur Hardwarebeschleunigung) oder den integrierten Transcoder verwenden. Um einen externen Transcoder zu verwenden, aktivieren Sie die folgende Option und folgen Sie den Anweisungen unter diesem Link:",
+    "external transcoder configuration" : "Externe Transcoder-Konfiguration",
+    "Enable external transcoder (go-vod)" : "Externen Transcoder aktivieren (go-vod)",
+    "Hardware Acceleration" : "Hardware-Beschleunigung",
+    "You must first make sure the correct drivers are installed before configuring acceleration." : "Sie müssen zunächst sicherstellen, dass die richtigen Treiber installiert sind, bevor Sie die Beschleunigung konfigurieren.",
+    "Make sure you test hardware acceleration with various options after enabling." : "Stellen Sie sicher, dass Sie die Hardwarebeschleunigung nach der Aktivierung mit verschiedenen Optionen testen.",
+    "Do not enable multiple types of hardware acceleration simultaneously." : "Aktivieren Sie nicht mehrere Arten der Hardwarebeschleunigung gleichzeitig.",
+    "Intel processors supporting QuickSync Video (QSV) as well as some AMD GPUs can be used for transcoding using VA-API acceleration." : "Intel-Prozessoren, die QuickSync Video (QSV) unterstützen, sowie einige AMD-GPUs können für die Transcodierung mit VA-API-Beschleunigung verwendet werden.",
+    "For more details on driver installation, check the following link:" : "Weitere Einzelheiten zur Treiberinstallation finden Sie unter folgendem Link:",
+    "Enable acceleration with VA-API" : "Beschleunigung mit VA-API aktivieren",
+    "Enable low-power mode (QSV)" : "Energiesparmodus (QSV) aktivieren",
+    "NVIDIA GPUs can be used for transcoding using the NVENC encoder with the proper drivers." : "NVIDIA-GPUs können für die Transcodierung mit dem NVENC-Encoder mit den richtigen Treibern verwendet werden.",
+    "Depending on the versions of the installed SDK and ffmpeg, you need to specify the scaler to use" : "Abhängig von den Versionen des installierten SDK und ffmpeg müssen Sie den zu verwendenden Scaler angeben",
+    "No automated tests are available for NVIDIA acceleration." : "Für die NVIDIA-Beschleunigung sind keine automatisierten Tests verfügbar.",
+    "Enable acceleration with NVENC" : "Beschleunigung mit NVENC aktivieren",
+    "Enable NVENC Temporal AQ" : "NVENC Temporal AQ aktivieren",
+    "NPP scaler" : "NPP-Scaler",
+    "CUDA scaler" : "CUDA-Scaler",
+    "Failed to update setting" : "Die Einstellung konnte nicht aktualisiert werden",
+    "{name} binary exists and is executable" : "{name}-Binärdatei existiert und ist ausführbar",
+    "{name} binary not found" : "{name}-Binärdatei nicht gefunden",
+    "{name} binary is not executable" : "{name}-Binärdatei ist nicht ausführbar",
+    "{name} failed test: {info}" : "{name} Test nicht bestanden: {info}",
+    "{name} binary exists and is usable" : "{name}-Binärdatei existiert und kann verwendet werden",
+    "{name} binary status: {status}" : "{Name} binärer Status: {Status}",
+    "Geometry support was not detected in your database" : "Geometrieunterstützung wurde in Ihrer Datenbank nicht erkannt",
+    "MySQL-like geometry support was detected " : "MySQL-ähnliche Geometrieunterstützung wurde erkannt",
+    "Postgres native geometry support was detected" : "Die native Postgres-Geometrieunterstützung wurde erkannt",
+    "VA-API device ({dev}) is readable" : "VA-API-Gerät ({dev}) ist lesbar",
+    "VA-API device ({dev}) not found" : "VA-API-Gerät ({dev}) nicht gefunden",
+    "VA-API device ({dev}) has incorrect permissions" : "VA-API-Gerät ({dev}) hat falsche Berechtigungen",
+    "VA-API device status: {status}" : "VA-API-Gerätestatus: {status}",
     "Settings" : "Einstellungen",
     "People (Recognize)" : "Personen (erkennen)",
     "People" : "Personen",
diff --git a/l10n/eu.js b/l10n/eu.js
index c8b5789e..86263dc1 100644
--- a/l10n/eu.js
+++ b/l10n/eu.js
@@ -2,6 +2,8 @@ OC.L10N.register(
     "memories",
     {
     "Memories" : "Memoriak",
+    "Hardware Acceleration" : "Hardware azelerazioa",
+    "Enable acceleration with VA-API" : "Gaitu VA-API bidezko azelerazioa",
     "Settings" : "Ezarpenak",
     "People (Recognize)" : "Pertsonak (Recognize)",
     "People" : "Jendea",
diff --git a/l10n/eu.json b/l10n/eu.json
index 15d92658..273053f6 100644
--- a/l10n/eu.json
+++ b/l10n/eu.json
@@ -1,5 +1,7 @@
 { "translations": {
     "Memories" : "Memoriak",
+    "Hardware Acceleration" : "Hardware azelerazioa",
+    "Enable acceleration with VA-API" : "Gaitu VA-API bidezko azelerazioa",
     "Settings" : "Ezarpenak",
     "People (Recognize)" : "Pertsonak (Recognize)",
     "People" : "Jendea",
diff --git a/l10n/sr.js b/l10n/sr.js
index 2e3d10a3..75fea415 100644
--- a/l10n/sr.js
+++ b/l10n/sr.js
@@ -4,6 +4,64 @@ OC.L10N.register(
     "Memories" : "Успомене",
     "Fast, modern and advanced photo management suite" : "Брза, модерна и напредна свита програма за управљање фотографијама",
     "# Memories: Photo Management for Nextcloud\n\nMemories is a *batteries-included* photo management solution for Nextcloud with advanced features including:\n\n- **📸 Timeline**: Sort photos and videos by date taken, parsed from Exif data.\n- **⏪ Rewind**: Jump to any time in the past instantly and relive your memories.\n- **🤖 AI Tagging**: Group photos by people and objects, powered by [recognize](https://github.com/nextcloud/recognize) and [facerecognition](https://github.com/matiasdelellis/facerecognition).\n- **🖼️ Albums**: Create albums to group photos and videos together. Then share these albums with others.\n- **🫱🏻‍🫲🏻 External Sharing**: Share photos and videos with people outside of your Nextcloud instance.\n- **📱 Mobile Support**: Work from any device, of any shape and size through the web app.\n- **✏️ Edit Metadata**: Edit dates and other metadata on photos quickly and in bulk.\n- **📦 Archive**: Store photos you don't want to see in your timeline in a separate folder.\n- **📹 Video Transcoding**: Transcode videos and use HLS for maximal performance.\n- **🗺️ Map**: View your photos on a map, tagged with accurate reverse geocoding.\n- **📦 Migration**: Migrate easily from Nextcloud Photos and Google Takeout.\n- **⚡️ Performance**: Do all this very fast.\n\n## 🚀 Installation\n\n1. Install the app from the Nextcloud app store (try a demo [here](https://memories-demo.radialapps.com/apps/memories/)).\n1. Perform the recommended [configuration steps](https://github.com/pulsejet/memories/wiki/Configuration).\n1. Run `php occ memories:index` to generate metadata indices for existing photos.\n1. Open the 📷 Memories app in Nextcloud and set the directory containing your photos." : "# Успомене: управљање фотографијама за Nextcloud\n\nУспомене су решење за управљање фотографијама на Nextcloud које долази „заједно са батеријама” и има напредне могућности као што су:\n\n- **📸 Временска линија**: поређајте слике и видео сниме по датуму снимања, издвојеног из Exif података.\n- **⏪ Премотавање**: скочите тренутно на било које време у прошлости и освежите своје успомене.\n- **🤖 AI означавање**: групишите слике по људима и објектима, обезбеђују [recognize](https://github.com/nextcloud/recognize) и [facerecognition](https://github.com/matiasdelellis/facerecognition).\n- **🖼️ Албуми**: креирајте албуме да групишете фотографије и видео снимке. Затим делите те албуме са осталима.\n- **🫱🏻‍🫲🏻 Спољно дељење**: делите фотографије и видео снимке са људима ван своје Nextcloud инстанце.\n- **📱 Подршка за мобилни**: радите са било ког уређаја, било ког облика и величине кроз веб апликацију.\n- **✏️ Уређивање метаподатака**: уређујте датуме и остале метаподатке једноставно и за већи број слика одједном.\n- **📦 Архивирање**: смештајте фотографије које не желите да се прикажу у временској линији у посебан фолдер.\n- **📹 Видео транскодирање**: транскодујте видео и користите HLS за максималне перформансе.\n- **🗺️ Мапа**: прикажите своје фотографије на мапи, означене прецизним обрнутим геокодирањем.\n- **📦 Миграција**: мигрирајте једноставно са Nextcloud Photos и Google Takeout.\n- **⚡️ Перформансе**: све ово радите веома брзо.\n\n## 🚀 Инсталација\n\n1. Инсталирајте апликцију са Nextcloud Продавнице апликација (пробајте демо [овде](https://memories-demo.radialapps.com/apps/memories/)).\n1. Извршите препоручене [кораке конфигурације](https://github.com/pulsejet/memories/wiki/Configuration).\n1. Извршите `php occ memories:index` да се генеришу индекси метаподатака за постојеће фотографије.\n1. Отворите апликацију 📷 Успомене у Nextcloud и подесите директоријум у којем се налазе ваше фотографије.",
+    "Path to packaged exiftool binary" : "Путања до запаковане exiftool бинарног фајла",
+    "ffmpeg path" : "ffmpeg путања",
+    "ffprobe path" : "ffprobe путања",
+    "Binary path (local only)" : "Путања до бинарног фајла (само локална)",
+    "Bind address (local only)" : "Адреса везивања (само локална)",
+    "Connection address (same as bind if local)" : "Адреса везе (иста као везивања, ако је локална)",
+    "EXIF Extraction" : "EXIF издвајање",
+    "Use system perl (only if packaged binary does not work)" : "Користи системски perl (само ако запаковани бинарни фајл не ради)",
+    "Reverse Geocoding" : "Обрнуто геокодирање",
+    "Database is populated with {n} geometries" : "Уа бази података се налази {n} геометрија",
+    "Geometry table has not been created" : "Није креирана табела геометрије",
+    "Reverse geocoding has not been configured ({gisType})." : "Није подешено обрнуто геокодирање ({gisType}).",
+    "Memories supports offline reverse geocoding using the OpenStreetMaps data on MySQL and Postgres." : "Успомене подржавају обрнуто геокодирање ван мреже употребом OpenStreetMaps података на MySQL и Postgres.",
+    "You need to download the planet data into your database. This is highly recommended and has low overhead." : "Морате да презумете податке о планети у своју базу података. Ово се снажно препоручује и није превише захтевно.",
+    "If the button below does not work for importing the planet data, use " : "Ако дугме испод не функционше за увоз података о планети, употребите",
+    "Note: the geometry data is stored in the " : "Напомена: подаци о геометрији су сачувани у",
+    "Download planet database" : "Преузми базу података планете",
+    "Video Streaming" : "Видео стриминг",
+    "Live transcoding provides for adaptive streaming of videos using HLS." : "Транскодирање уживо обезбеђује прилагодљиви стриминг видеа употребом HLS.",
+    "Note that this may be very CPU intensive without hardware acceleration, and transcoding will not be used for external storage." : "Имајте на уму да ово може поприлично да оптерети CPU ако нема хардверског убрзања, и транскодирање се неће користити за спољна складишта.",
+    "Enable Transcoding" : "Укључи транскодирање",
+    "Global default video quality (user may override)" : "Глобални подразумевани квалитет видеа (корисници могу да преиначе)",
+    "Auto (adaptive transcode)" : "Ауто (прилагодљиво транскодирање)",
+    "Original (transcode with max quality)" : "Оригинал (транскодирање максималног квалитета)",
+    "Direct (original video file without transcode)" : "Директно (оригинални видео фајл без транскодирања)",
+    "Transcoder configuration" : "Конфигурација транскодирања",
+    "Memories uses the go-vod transcoder. You can run go-vod exernally (e.g. in a separate Docker container for hardware acceleration) or use the built-in transcoder. To use an external transcoder, enable the following option and follow the instructions at this link:" : "Успомене користе go-vod транскодер. go-vod можете да извршавате споља (нпр. у посебном Docker контејнеру за хардверско убрзање) or или да користите уграђени транскодер. Ако желите да користите спољни транскодер, укључите следећу опцију и следите упутства на овом линку:",
+    "external transcoder configuration" : "Конфигурација спољног транскодера",
+    "Enable external transcoder (go-vod)" : "Укључи спољни транскодер (go-vod)",
+    "Hardware Acceleration" : "Хардверско убрзање",
+    "You must first make sure the correct drivers are installed before configuring acceleration." : "Најпре морате обезбедити да су инсталирани одговарајући драјвери пре него што конфигуришете убрзање.",
+    "Make sure you test hardware acceleration with various options after enabling." : "Пре укључивања, тестирајте хардверско убрзање са различитим опцијама.",
+    "Do not enable multiple types of hardware acceleration simultaneously." : "Немојте истовремено да укључите више различитих типова хардверског убрзања.",
+    "Intel processors supporting QuickSync Video (QSV) as well as some AMD GPUs can be used for transcoding using VA-API acceleration." : "Intel процесори подржавају QuickSync Video (QSV) као што неки AMD GPUs могу да се користе са VA-API убрзањем.",
+    "For more details on driver installation, check the following link:" : "За више детаља у вези са инсталацијом драјвера, погледајте следећи линк:",
+    "Enable acceleration with VA-API" : "Укључи убрзање са VA-API",
+    "Enable low-power mode (QSV)" : "Уљкучи режим мале снаге (QSV)",
+    "NVIDIA GPUs can be used for transcoding using the NVENC encoder with the proper drivers." : "Уз одговарајуће драјвере, NVIDIA GPU картице могу да се користе за транскодирање помоћу NVENC енкодера.",
+    "Depending on the versions of the installed SDK and ffmpeg, you need to specify the scaler to use" : "У зависности од верзије инсталираног SDK и ffmpeg, морате да наведете скалер који ће се користити",
+    "No automated tests are available for NVIDIA acceleration." : "За NVIDIA убрзање нема доступних аутоматизованих тестова.",
+    "Enable acceleration with NVENC" : "Укључи убрзање са NVENC",
+    "Enable NVENC Temporal AQ" : "Уљкучи NVENC Темпорални AQ",
+    "NPP scaler" : "NPP скалер",
+    "CUDA scaler" : "CUDA скалер",
+    "Failed to update setting" : "Није успело ажурирање подешавања",
+    "{name} binary exists and is executable" : "{name} бинарни фајл постоји и може да се извршава",
+    "{name} binary not found" : "{name} бинарни фајл није пронађен",
+    "{name} binary is not executable" : "{name} бинарни фајл не може да се изврши",
+    "{name} failed test: {info}" : "{name} неуспешан тест: {info}",
+    "{name} binary exists and is usable" : "{name} бинарни фајл постоји и може да се користи",
+    "{name} binary status: {status}" : "Стату {name} бинарног фајла: {status}",
+    "Geometry support was not detected in your database" : "У вашој бази података није детектована подршка за геометрију",
+    "MySQL-like geometry support was detected " : "Детектована је подршка за геометрију која личи на MySQL",
+    "Postgres native geometry support was detected" : "Детектована је подршка за Postgres природну геометрију",
+    "VA-API device ({dev}) is readable" : "VA-API уређај ({dev}) може да се чита",
+    "VA-API device ({dev}) not found" : "VA-API уређај ({dev}) није пронађен",
+    "VA-API device ({dev}) has incorrect permissions" : "VA-API уређај ({dev}) нема исправне дозволе",
+    "VA-API device status: {status}" : "Статус VA-API уређаја: {status}",
     "Settings" : "Поставке",
     "People (Recognize)" : "Људи (препознај)",
     "People" : "Људи",
diff --git a/l10n/sr.json b/l10n/sr.json
index 31b57f1c..754474e5 100644
--- a/l10n/sr.json
+++ b/l10n/sr.json
@@ -2,6 +2,64 @@
     "Memories" : "Успомене",
     "Fast, modern and advanced photo management suite" : "Брза, модерна и напредна свита програма за управљање фотографијама",
     "# Memories: Photo Management for Nextcloud\n\nMemories is a *batteries-included* photo management solution for Nextcloud with advanced features including:\n\n- **📸 Timeline**: Sort photos and videos by date taken, parsed from Exif data.\n- **⏪ Rewind**: Jump to any time in the past instantly and relive your memories.\n- **🤖 AI Tagging**: Group photos by people and objects, powered by [recognize](https://github.com/nextcloud/recognize) and [facerecognition](https://github.com/matiasdelellis/facerecognition).\n- **🖼️ Albums**: Create albums to group photos and videos together. Then share these albums with others.\n- **🫱🏻‍🫲🏻 External Sharing**: Share photos and videos with people outside of your Nextcloud instance.\n- **📱 Mobile Support**: Work from any device, of any shape and size through the web app.\n- **✏️ Edit Metadata**: Edit dates and other metadata on photos quickly and in bulk.\n- **📦 Archive**: Store photos you don't want to see in your timeline in a separate folder.\n- **📹 Video Transcoding**: Transcode videos and use HLS for maximal performance.\n- **🗺️ Map**: View your photos on a map, tagged with accurate reverse geocoding.\n- **📦 Migration**: Migrate easily from Nextcloud Photos and Google Takeout.\n- **⚡️ Performance**: Do all this very fast.\n\n## 🚀 Installation\n\n1. Install the app from the Nextcloud app store (try a demo [here](https://memories-demo.radialapps.com/apps/memories/)).\n1. Perform the recommended [configuration steps](https://github.com/pulsejet/memories/wiki/Configuration).\n1. Run `php occ memories:index` to generate metadata indices for existing photos.\n1. Open the 📷 Memories app in Nextcloud and set the directory containing your photos." : "# Успомене: управљање фотографијама за Nextcloud\n\nУспомене су решење за управљање фотографијама на Nextcloud које долази „заједно са батеријама” и има напредне могућности као што су:\n\n- **📸 Временска линија**: поређајте слике и видео сниме по датуму снимања, издвојеног из Exif података.\n- **⏪ Премотавање**: скочите тренутно на било које време у прошлости и освежите своје успомене.\n- **🤖 AI означавање**: групишите слике по људима и објектима, обезбеђују [recognize](https://github.com/nextcloud/recognize) и [facerecognition](https://github.com/matiasdelellis/facerecognition).\n- **🖼️ Албуми**: креирајте албуме да групишете фотографије и видео снимке. Затим делите те албуме са осталима.\n- **🫱🏻‍🫲🏻 Спољно дељење**: делите фотографије и видео снимке са људима ван своје Nextcloud инстанце.\n- **📱 Подршка за мобилни**: радите са било ког уређаја, било ког облика и величине кроз веб апликацију.\n- **✏️ Уређивање метаподатака**: уређујте датуме и остале метаподатке једноставно и за већи број слика одједном.\n- **📦 Архивирање**: смештајте фотографије које не желите да се прикажу у временској линији у посебан фолдер.\n- **📹 Видео транскодирање**: транскодујте видео и користите HLS за максималне перформансе.\n- **🗺️ Мапа**: прикажите своје фотографије на мапи, означене прецизним обрнутим геокодирањем.\n- **📦 Миграција**: мигрирајте једноставно са Nextcloud Photos и Google Takeout.\n- **⚡️ Перформансе**: све ово радите веома брзо.\n\n## 🚀 Инсталација\n\n1. Инсталирајте апликцију са Nextcloud Продавнице апликација (пробајте демо [овде](https://memories-demo.radialapps.com/apps/memories/)).\n1. Извршите препоручене [кораке конфигурације](https://github.com/pulsejet/memories/wiki/Configuration).\n1. Извршите `php occ memories:index` да се генеришу индекси метаподатака за постојеће фотографије.\n1. Отворите апликацију 📷 Успомене у Nextcloud и подесите директоријум у којем се налазе ваше фотографије.",
+    "Path to packaged exiftool binary" : "Путања до запаковане exiftool бинарног фајла",
+    "ffmpeg path" : "ffmpeg путања",
+    "ffprobe path" : "ffprobe путања",
+    "Binary path (local only)" : "Путања до бинарног фајла (само локална)",
+    "Bind address (local only)" : "Адреса везивања (само локална)",
+    "Connection address (same as bind if local)" : "Адреса везе (иста као везивања, ако је локална)",
+    "EXIF Extraction" : "EXIF издвајање",
+    "Use system perl (only if packaged binary does not work)" : "Користи системски perl (само ако запаковани бинарни фајл не ради)",
+    "Reverse Geocoding" : "Обрнуто геокодирање",
+    "Database is populated with {n} geometries" : "Уа бази података се налази {n} геометрија",
+    "Geometry table has not been created" : "Није креирана табела геометрије",
+    "Reverse geocoding has not been configured ({gisType})." : "Није подешено обрнуто геокодирање ({gisType}).",
+    "Memories supports offline reverse geocoding using the OpenStreetMaps data on MySQL and Postgres." : "Успомене подржавају обрнуто геокодирање ван мреже употребом OpenStreetMaps података на MySQL и Postgres.",
+    "You need to download the planet data into your database. This is highly recommended and has low overhead." : "Морате да презумете податке о планети у своју базу података. Ово се снажно препоручује и није превише захтевно.",
+    "If the button below does not work for importing the planet data, use " : "Ако дугме испод не функционше за увоз података о планети, употребите",
+    "Note: the geometry data is stored in the " : "Напомена: подаци о геометрији су сачувани у",
+    "Download planet database" : "Преузми базу података планете",
+    "Video Streaming" : "Видео стриминг",
+    "Live transcoding provides for adaptive streaming of videos using HLS." : "Транскодирање уживо обезбеђује прилагодљиви стриминг видеа употребом HLS.",
+    "Note that this may be very CPU intensive without hardware acceleration, and transcoding will not be used for external storage." : "Имајте на уму да ово може поприлично да оптерети CPU ако нема хардверског убрзања, и транскодирање се неће користити за спољна складишта.",
+    "Enable Transcoding" : "Укључи транскодирање",
+    "Global default video quality (user may override)" : "Глобални подразумевани квалитет видеа (корисници могу да преиначе)",
+    "Auto (adaptive transcode)" : "Ауто (прилагодљиво транскодирање)",
+    "Original (transcode with max quality)" : "Оригинал (транскодирање максималног квалитета)",
+    "Direct (original video file without transcode)" : "Директно (оригинални видео фајл без транскодирања)",
+    "Transcoder configuration" : "Конфигурација транскодирања",
+    "Memories uses the go-vod transcoder. You can run go-vod exernally (e.g. in a separate Docker container for hardware acceleration) or use the built-in transcoder. To use an external transcoder, enable the following option and follow the instructions at this link:" : "Успомене користе go-vod транскодер. go-vod можете да извршавате споља (нпр. у посебном Docker контејнеру за хардверско убрзање) or или да користите уграђени транскодер. Ако желите да користите спољни транскодер, укључите следећу опцију и следите упутства на овом линку:",
+    "external transcoder configuration" : "Конфигурација спољног транскодера",
+    "Enable external transcoder (go-vod)" : "Укључи спољни транскодер (go-vod)",
+    "Hardware Acceleration" : "Хардверско убрзање",
+    "You must first make sure the correct drivers are installed before configuring acceleration." : "Најпре морате обезбедити да су инсталирани одговарајући драјвери пре него што конфигуришете убрзање.",
+    "Make sure you test hardware acceleration with various options after enabling." : "Пре укључивања, тестирајте хардверско убрзање са различитим опцијама.",
+    "Do not enable multiple types of hardware acceleration simultaneously." : "Немојте истовремено да укључите више различитих типова хардверског убрзања.",
+    "Intel processors supporting QuickSync Video (QSV) as well as some AMD GPUs can be used for transcoding using VA-API acceleration." : "Intel процесори подржавају QuickSync Video (QSV) као што неки AMD GPUs могу да се користе са VA-API убрзањем.",
+    "For more details on driver installation, check the following link:" : "За више детаља у вези са инсталацијом драјвера, погледајте следећи линк:",
+    "Enable acceleration with VA-API" : "Укључи убрзање са VA-API",
+    "Enable low-power mode (QSV)" : "Уљкучи режим мале снаге (QSV)",
+    "NVIDIA GPUs can be used for transcoding using the NVENC encoder with the proper drivers." : "Уз одговарајуће драјвере, NVIDIA GPU картице могу да се користе за транскодирање помоћу NVENC енкодера.",
+    "Depending on the versions of the installed SDK and ffmpeg, you need to specify the scaler to use" : "У зависности од верзије инсталираног SDK и ffmpeg, морате да наведете скалер који ће се користити",
+    "No automated tests are available for NVIDIA acceleration." : "За NVIDIA убрзање нема доступних аутоматизованих тестова.",
+    "Enable acceleration with NVENC" : "Укључи убрзање са NVENC",
+    "Enable NVENC Temporal AQ" : "Уљкучи NVENC Темпорални AQ",
+    "NPP scaler" : "NPP скалер",
+    "CUDA scaler" : "CUDA скалер",
+    "Failed to update setting" : "Није успело ажурирање подешавања",
+    "{name} binary exists and is executable" : "{name} бинарни фајл постоји и може да се извршава",
+    "{name} binary not found" : "{name} бинарни фајл није пронађен",
+    "{name} binary is not executable" : "{name} бинарни фајл не може да се изврши",
+    "{name} failed test: {info}" : "{name} неуспешан тест: {info}",
+    "{name} binary exists and is usable" : "{name} бинарни фајл постоји и може да се користи",
+    "{name} binary status: {status}" : "Стату {name} бинарног фајла: {status}",
+    "Geometry support was not detected in your database" : "У вашој бази података није детектована подршка за геометрију",
+    "MySQL-like geometry support was detected " : "Детектована је подршка за геометрију која личи на MySQL",
+    "Postgres native geometry support was detected" : "Детектована је подршка за Postgres природну геометрију",
+    "VA-API device ({dev}) is readable" : "VA-API уређај ({dev}) може да се чита",
+    "VA-API device ({dev}) not found" : "VA-API уређај ({dev}) није пронађен",
+    "VA-API device ({dev}) has incorrect permissions" : "VA-API уређај ({dev}) нема исправне дозволе",
+    "VA-API device status: {status}" : "Статус VA-API уређаја: {status}",
     "Settings" : "Поставке",
     "People (Recognize)" : "Људи (препознај)",
     "People" : "Људи",
diff --git a/l10n/zh_HK.js b/l10n/zh_HK.js
index 5f1601e1..0cb3a685 100644
--- a/l10n/zh_HK.js
+++ b/l10n/zh_HK.js
@@ -4,6 +4,63 @@ OC.L10N.register(
     "Memories" : "回憶",
     "Fast, modern and advanced photo management suite" : "快速、現代且進階的照片管理套裝軟體",
     "# Memories: Photo Management for Nextcloud\n\nMemories is a *batteries-included* photo management solution for Nextcloud with advanced features including:\n\n- **📸 Timeline**: Sort photos and videos by date taken, parsed from Exif data.\n- **⏪ Rewind**: Jump to any time in the past instantly and relive your memories.\n- **🤖 AI Tagging**: Group photos by people and objects, powered by [recognize](https://github.com/nextcloud/recognize) and [facerecognition](https://github.com/matiasdelellis/facerecognition).\n- **🖼️ Albums**: Create albums to group photos and videos together. Then share these albums with others.\n- **🫱🏻‍🫲🏻 External Sharing**: Share photos and videos with people outside of your Nextcloud instance.\n- **📱 Mobile Support**: Work from any device, of any shape and size through the web app.\n- **✏️ Edit Metadata**: Edit dates and other metadata on photos quickly and in bulk.\n- **📦 Archive**: Store photos you don't want to see in your timeline in a separate folder.\n- **📹 Video Transcoding**: Transcode videos and use HLS for maximal performance.\n- **🗺️ Map**: View your photos on a map, tagged with accurate reverse geocoding.\n- **📦 Migration**: Migrate easily from Nextcloud Photos and Google Takeout.\n- **⚡️ Performance**: Do all this very fast.\n\n## 🚀 Installation\n\n1. Install the app from the Nextcloud app store (try a demo [here](https://memories-demo.radialapps.com/apps/memories/)).\n1. Perform the recommended [configuration steps](https://github.com/pulsejet/memories/wiki/Configuration).\n1. Run `php occ memories:index` to generate metadata indices for existing photos.\n1. Open the 📷 Memories app in Nextcloud and set the directory containing your photos." : "# 回憶：Nextcloud 的照片管理程式\n\n回憶是一個有進階功能的 *超強* Nextcloud 相片管理解決方案，包含了以下功能：\n\n- **📸 時間軸**：從 Exif 資料中按拍攝日期對照片與影片進行排序。\n- **⏪ 倒帶**：立刻跳回過去的任何時間，重溫您的回憶。\n- **🤖 AI 標記**：使用 [recognize](https://github.com/nextcloud/recognize) 與 [facerecognition](https://github.com/matiasdelellis/facerecognition) 應用程式提供的按人物與物體對照片進行分組。\n- **🖼️ 相簿**：建立相簿以將照片與影片分組。然後將這些相簿與其他人分享。\n- **🫱🏻‍🫲🏻 外部分享**：與您 Nextcloud 站台以外的人們分享照片與影片。\n- **📱 行動裝置支援**：透過網路應用程式在任何形狀與大小的裝置上運作。\n- **✏️ 編輯詮釋資料**：快速輕鬆地批次編輯照片上的日期與其他詮釋資料。\n- **📦 封存**：將您不想在時間軸中看到的照片儲存在單獨的資料夾中。\n- **📹 視訊轉換編碼**：轉換視訊編碼並使用 HLS 來取得最大效能。\n- **🗺️ 地圖**：在地圖上檢視您的照片，並使用準確的反向地理編碼來標記。\n- **📦 遷移**：從 Nextcloud Photos 與 Google Takeout 簡易遷移。\n- **⚡️ 效能**：這些功能都超快。\n\n## 🚀 安裝\n\n- 想看看本應用程式的外觀與感覺，請見[公開展示](https://memories-demo.radialapps.com/apps/memories/).\n- 展示站是唯讀的，可能會有點慢（來自 [Oracle Cloud](https://www.oracle.com/cloud/free/) 的免費層級虛擬機器）。\n- 照片則歸功於 [Unsplash](https://unsplash.com/)（若要檢視單獨的署名，請參見每個資料夾中的資訊）。\n\n\n## 🚀 安裝\n1. 從 Nextcloud 應用程式商店安裝應用程式（[在此](https://memories-demo.radialapps.com/apps/memories/)試用展示版本）。\n1. 執行建議的[設定步驟](https://github.com/pulsejet/memories/wiki/Configuration)。\n1. 執行 `php occ memories:index` 以產生既有照片的詮釋資料索引。\n1. 在 Nextcloud 中開啟 📷 回憶應用程式，並設定包含您照片的目錄。",
+    "Path to packaged exiftool binary" : "包裝好的 exiftool 二進製檔案的途徑。",
+    "ffmpeg path" : "ffmpeg 途徑",
+    "ffprobe path" : "ffprobe 途徑",
+    "Binary path (local only)" : "二進製檔案的途徑（僅近端）",
+    "Bind address (local only)" : "綁定地址（僅近端）",
+    "Connection address (same as bind if local)" : "連線地址（若為近端的話，則與綁定相同）",
+    "EXIF Extraction" : "EXIF 解壓縮",
+    "Use system perl (only if packaged binary does not work)" : "使用系統 PERL（僅當包裝好的二進製檔案不起作用時）",
+    "Reverse Geocoding" : "反向地理編碼",
+    "Database is populated with {n} geometries" : "數據庫中自動增加了 {n} 個幾何圖形",
+    "Geometry table has not been created" : "尚未創建幾何圖形數據庫表",
+    "Reverse geocoding has not been configured ({gisType})." : "尚未配置反向地理編碼（{gisType}）。",
+    "Memories supports offline reverse geocoding using the OpenStreetMaps data on MySQL and Postgres." : "Memories 支援使用 MySQL 與 Postgres 上的 OpenStreetMap 資料進行離線反向地理編碼。",
+    "You need to download the planet data into your database. This is highly recommended and has low overhead." : "您需要將地球資料下載到您的資料庫中。強烈推薦此方式且其開銷很低。",
+    "If the button below does not work for importing the planet data, use " : "若下方按鈕無法匯入地球資料，請使用",
+    "Download planet database" : "下載地球數據庫",
+    "Video Streaming" : "視像串流",
+    "Live transcoding provides for adaptive streaming of videos using HLS." : "即時轉換編碼使用 HLS 提供自動調整串流。",
+    "Note that this may be very CPU intensive without hardware acceleration, and transcoding will not be used for external storage." : "請注意，若無硬體加速，這可能會讓 CPU 有非常高的使用率，且轉換編碼不會用於外部儲存空間。",
+    "Enable Transcoding" : "啟用轉換編碼",
+    "Global default video quality (user may override)" : "全局默認視像質素（用戶可以推翻）",
+    "Auto (adaptive transcode)" : "自動（自動調整轉碼）",
+    "Original (transcode with max quality)" : "原先的（使用最高質素轉碼）",
+    "Direct (original video file without transcode)" : "直接（沒有轉碼的原先的視像檔案）",
+    "Transcoder configuration" : "轉碼器配置",
+    "Memories uses the go-vod transcoder. You can run go-vod exernally (e.g. in a separate Docker container for hardware acceleration) or use the built-in transcoder. To use an external transcoder, enable the following option and follow the instructions at this link:" : "Memories 使用 go-vod 轉碼器。您可以在外部執行 go-vod（例如，在單獨的 Docker 容器中進行硬體加速）或使用內建的轉碼器。要使用外部轉碼器，請啟用以下選項並按照此連結中的說明進行操作：",
+    "external transcoder configuration" : "外部轉碼器配置",
+    "Enable external transcoder (go-vod)" : "啟用外部轉碼器 (go-vod)",
+    "Hardware Acceleration" : "硬體加速",
+    "You must first make sure the correct drivers are installed before configuring acceleration." : "在配置加速之前，您必須先確保安裝了正確的驅動程式。",
+    "Make sure you test hardware acceleration with various options after enabling." : "確保在啟用後使用各種選項測試硬件加速。",
+    "Do not enable multiple types of hardware acceleration simultaneously." : "不要同時啟用多種類型的硬件加速。",
+    "Intel processors supporting QuickSync Video (QSV) as well as some AMD GPUs can be used for transcoding using VA-API acceleration." : "支援 QuickSync Video (QSV) 的 Intel 處理器以及一些 AMD GPU 可使用 VA-API 加速進行轉碼。",
+    "For more details on driver installation, check the following link:" : "關於更多驅動程式安裝的資訊，請看以下連結：",
+    "Enable acceleration with VA-API" : "啟用 VA-API 加速",
+    "Enable low-power mode (QSV)" : "啟用低功率模式 (QSV)",
+    "NVIDIA GPUs can be used for transcoding using the NVENC encoder with the proper drivers." : "NVIDIA GPU 可用於使用帶有適當驅動程式的 NVENC 編碼器進行轉碼。",
+    "Depending on the versions of the installed SDK and ffmpeg, you need to specify the scaler to use" : "取決於安裝的 SDK 與 ffmpeg 版本，您可能需要指定要使用的 scaler",
+    "No automated tests are available for NVIDIA acceleration." : "未提供 NVIDIA 加速的自動化測試",
+    "Enable acceleration with NVENC" : "啟用 NVENC 加速",
+    "Enable NVENC Temporal AQ" : "啟用 NVENC 臨時 AQ",
+    "NPP scaler" : "NPP scaler",
+    "CUDA scaler" : "CUDA scaler",
+    "Failed to update setting" : "更新設定失敗",
+    "{name} binary exists and is executable" : "{name} 二進製檔案存在且可執行",
+    "{name} binary not found" : "找不到 {name}  二進製檔案",
+    "{name} binary is not executable" : "{name}  二進製檔案不是可執行檔案",
+    "{name} failed test: {info}" : "{name} 測試失敗：{info}",
+    "{name} binary exists and is usable" : "{name} 二進位檔案存在且可使用",
+    "{name} binary status: {status}" : "{name}  二進製檔案狀態：{status}",
+    "Geometry support was not detected in your database" : "您的數據庫中並未偵測到 geometry 支援",
+    "MySQL-like geometry support was detected " : "檢測到類似 MySQL 的 geometry 支援",
+    "Postgres native geometry support was detected" : "偵測到 Postgres 的原生 geometry 支援",
+    "VA-API device ({dev}) is readable" : "VA-API 裝置（{dev}）可讀",
+    "VA-API device ({dev}) not found" : "找不到 VA-API 裝置（{dev}）",
+    "VA-API device ({dev}) has incorrect permissions" : "VA-API 裝置（{dev}）權限不正確",
+    "VA-API device status: {status}" : "VA-API 裝置狀態：{status}",
     "Settings" : "設定",
     "People (Recognize)" : "人物（Recognize）",
     "People" : "人物",
diff --git a/l10n/zh_HK.json b/l10n/zh_HK.json
index 0f17874d..b147241c 100644
--- a/l10n/zh_HK.json
+++ b/l10n/zh_HK.json
@@ -2,6 +2,63 @@
     "Memories" : "回憶",
     "Fast, modern and advanced photo management suite" : "快速、現代且進階的照片管理套裝軟體",
     "# Memories: Photo Management for Nextcloud\n\nMemories is a *batteries-included* photo management solution for Nextcloud with advanced features including:\n\n- **📸 Timeline**: Sort photos and videos by date taken, parsed from Exif data.\n- **⏪ Rewind**: Jump to any time in the past instantly and relive your memories.\n- **🤖 AI Tagging**: Group photos by people and objects, powered by [recognize](https://github.com/nextcloud/recognize) and [facerecognition](https://github.com/matiasdelellis/facerecognition).\n- **🖼️ Albums**: Create albums to group photos and videos together. Then share these albums with others.\n- **🫱🏻‍🫲🏻 External Sharing**: Share photos and videos with people outside of your Nextcloud instance.\n- **📱 Mobile Support**: Work from any device, of any shape and size through the web app.\n- **✏️ Edit Metadata**: Edit dates and other metadata on photos quickly and in bulk.\n- **📦 Archive**: Store photos you don't want to see in your timeline in a separate folder.\n- **📹 Video Transcoding**: Transcode videos and use HLS for maximal performance.\n- **🗺️ Map**: View your photos on a map, tagged with accurate reverse geocoding.\n- **📦 Migration**: Migrate easily from Nextcloud Photos and Google Takeout.\n- **⚡️ Performance**: Do all this very fast.\n\n## 🚀 Installation\n\n1. Install the app from the Nextcloud app store (try a demo [here](https://memories-demo.radialapps.com/apps/memories/)).\n1. Perform the recommended [configuration steps](https://github.com/pulsejet/memories/wiki/Configuration).\n1. Run `php occ memories:index` to generate metadata indices for existing photos.\n1. Open the 📷 Memories app in Nextcloud and set the directory containing your photos." : "# 回憶：Nextcloud 的照片管理程式\n\n回憶是一個有進階功能的 *超強* Nextcloud 相片管理解決方案，包含了以下功能：\n\n- **📸 時間軸**：從 Exif 資料中按拍攝日期對照片與影片進行排序。\n- **⏪ 倒帶**：立刻跳回過去的任何時間，重溫您的回憶。\n- **🤖 AI 標記**：使用 [recognize](https://github.com/nextcloud/recognize) 與 [facerecognition](https://github.com/matiasdelellis/facerecognition) 應用程式提供的按人物與物體對照片進行分組。\n- **🖼️ 相簿**：建立相簿以將照片與影片分組。然後將這些相簿與其他人分享。\n- **🫱🏻‍🫲🏻 外部分享**：與您 Nextcloud 站台以外的人們分享照片與影片。\n- **📱 行動裝置支援**：透過網路應用程式在任何形狀與大小的裝置上運作。\n- **✏️ 編輯詮釋資料**：快速輕鬆地批次編輯照片上的日期與其他詮釋資料。\n- **📦 封存**：將您不想在時間軸中看到的照片儲存在單獨的資料夾中。\n- **📹 視訊轉換編碼**：轉換視訊編碼並使用 HLS 來取得最大效能。\n- **🗺️ 地圖**：在地圖上檢視您的照片，並使用準確的反向地理編碼來標記。\n- **📦 遷移**：從 Nextcloud Photos 與 Google Takeout 簡易遷移。\n- **⚡️ 效能**：這些功能都超快。\n\n## 🚀 安裝\n\n- 想看看本應用程式的外觀與感覺，請見[公開展示](https://memories-demo.radialapps.com/apps/memories/).\n- 展示站是唯讀的，可能會有點慢（來自 [Oracle Cloud](https://www.oracle.com/cloud/free/) 的免費層級虛擬機器）。\n- 照片則歸功於 [Unsplash](https://unsplash.com/)（若要檢視單獨的署名，請參見每個資料夾中的資訊）。\n\n\n## 🚀 安裝\n1. 從 Nextcloud 應用程式商店安裝應用程式（[在此](https://memories-demo.radialapps.com/apps/memories/)試用展示版本）。\n1. 執行建議的[設定步驟](https://github.com/pulsejet/memories/wiki/Configuration)。\n1. 執行 `php occ memories:index` 以產生既有照片的詮釋資料索引。\n1. 在 Nextcloud 中開啟 📷 回憶應用程式，並設定包含您照片的目錄。",
+    "Path to packaged exiftool binary" : "包裝好的 exiftool 二進製檔案的途徑。",
+    "ffmpeg path" : "ffmpeg 途徑",
+    "ffprobe path" : "ffprobe 途徑",
+    "Binary path (local only)" : "二進製檔案的途徑（僅近端）",
+    "Bind address (local only)" : "綁定地址（僅近端）",
+    "Connection address (same as bind if local)" : "連線地址（若為近端的話，則與綁定相同）",
+    "EXIF Extraction" : "EXIF 解壓縮",
+    "Use system perl (only if packaged binary does not work)" : "使用系統 PERL（僅當包裝好的二進製檔案不起作用時）",
+    "Reverse Geocoding" : "反向地理編碼",
+    "Database is populated with {n} geometries" : "數據庫中自動增加了 {n} 個幾何圖形",
+    "Geometry table has not been created" : "尚未創建幾何圖形數據庫表",
+    "Reverse geocoding has not been configured ({gisType})." : "尚未配置反向地理編碼（{gisType}）。",
+    "Memories supports offline reverse geocoding using the OpenStreetMaps data on MySQL and Postgres." : "Memories 支援使用 MySQL 與 Postgres 上的 OpenStreetMap 資料進行離線反向地理編碼。",
+    "You need to download the planet data into your database. This is highly recommended and has low overhead." : "您需要將地球資料下載到您的資料庫中。強烈推薦此方式且其開銷很低。",
+    "If the button below does not work for importing the planet data, use " : "若下方按鈕無法匯入地球資料，請使用",
+    "Download planet database" : "下載地球數據庫",
+    "Video Streaming" : "視像串流",
+    "Live transcoding provides for adaptive streaming of videos using HLS." : "即時轉換編碼使用 HLS 提供自動調整串流。",
+    "Note that this may be very CPU intensive without hardware acceleration, and transcoding will not be used for external storage." : "請注意，若無硬體加速，這可能會讓 CPU 有非常高的使用率，且轉換編碼不會用於外部儲存空間。",
+    "Enable Transcoding" : "啟用轉換編碼",
+    "Global default video quality (user may override)" : "全局默認視像質素（用戶可以推翻）",
+    "Auto (adaptive transcode)" : "自動（自動調整轉碼）",
+    "Original (transcode with max quality)" : "原先的（使用最高質素轉碼）",
+    "Direct (original video file without transcode)" : "直接（沒有轉碼的原先的視像檔案）",
+    "Transcoder configuration" : "轉碼器配置",
+    "Memories uses the go-vod transcoder. You can run go-vod exernally (e.g. in a separate Docker container for hardware acceleration) or use the built-in transcoder. To use an external transcoder, enable the following option and follow the instructions at this link:" : "Memories 使用 go-vod 轉碼器。您可以在外部執行 go-vod（例如，在單獨的 Docker 容器中進行硬體加速）或使用內建的轉碼器。要使用外部轉碼器，請啟用以下選項並按照此連結中的說明進行操作：",
+    "external transcoder configuration" : "外部轉碼器配置",
+    "Enable external transcoder (go-vod)" : "啟用外部轉碼器 (go-vod)",
+    "Hardware Acceleration" : "硬體加速",
+    "You must first make sure the correct drivers are installed before configuring acceleration." : "在配置加速之前，您必須先確保安裝了正確的驅動程式。",
+    "Make sure you test hardware acceleration with various options after enabling." : "確保在啟用後使用各種選項測試硬件加速。",
+    "Do not enable multiple types of hardware acceleration simultaneously." : "不要同時啟用多種類型的硬件加速。",
+    "Intel processors supporting QuickSync Video (QSV) as well as some AMD GPUs can be used for transcoding using VA-API acceleration." : "支援 QuickSync Video (QSV) 的 Intel 處理器以及一些 AMD GPU 可使用 VA-API 加速進行轉碼。",
+    "For more details on driver installation, check the following link:" : "關於更多驅動程式安裝的資訊，請看以下連結：",
+    "Enable acceleration with VA-API" : "啟用 VA-API 加速",
+    "Enable low-power mode (QSV)" : "啟用低功率模式 (QSV)",
+    "NVIDIA GPUs can be used for transcoding using the NVENC encoder with the proper drivers." : "NVIDIA GPU 可用於使用帶有適當驅動程式的 NVENC 編碼器進行轉碼。",
+    "Depending on the versions of the installed SDK and ffmpeg, you need to specify the scaler to use" : "取決於安裝的 SDK 與 ffmpeg 版本，您可能需要指定要使用的 scaler",
+    "No automated tests are available for NVIDIA acceleration." : "未提供 NVIDIA 加速的自動化測試",
+    "Enable acceleration with NVENC" : "啟用 NVENC 加速",
+    "Enable NVENC Temporal AQ" : "啟用 NVENC 臨時 AQ",
+    "NPP scaler" : "NPP scaler",
+    "CUDA scaler" : "CUDA scaler",
+    "Failed to update setting" : "更新設定失敗",
+    "{name} binary exists and is executable" : "{name} 二進製檔案存在且可執行",
+    "{name} binary not found" : "找不到 {name}  二進製檔案",
+    "{name} binary is not executable" : "{name}  二進製檔案不是可執行檔案",
+    "{name} failed test: {info}" : "{name} 測試失敗：{info}",
+    "{name} binary exists and is usable" : "{name} 二進位檔案存在且可使用",
+    "{name} binary status: {status}" : "{name}  二進製檔案狀態：{status}",
+    "Geometry support was not detected in your database" : "您的數據庫中並未偵測到 geometry 支援",
+    "MySQL-like geometry support was detected " : "檢測到類似 MySQL 的 geometry 支援",
+    "Postgres native geometry support was detected" : "偵測到 Postgres 的原生 geometry 支援",
+    "VA-API device ({dev}) is readable" : "VA-API 裝置（{dev}）可讀",
+    "VA-API device ({dev}) not found" : "找不到 VA-API 裝置（{dev}）",
+    "VA-API device ({dev}) has incorrect permissions" : "VA-API 裝置（{dev}）權限不正確",
+    "VA-API device status: {status}" : "VA-API 裝置狀態：{status}",
     "Settings" : "設定",
     "People (Recognize)" : "人物（Recognize）",
     "People" : "人物",
diff --git a/l10n/zh_TW.js b/l10n/zh_TW.js
index 93b69790..54b9e51c 100644
--- a/l10n/zh_TW.js
+++ b/l10n/zh_TW.js
@@ -4,6 +4,64 @@ OC.L10N.register(
     "Memories" : "回憶",
     "Fast, modern and advanced photo management suite" : "快速、現代且進階的照片管理套裝軟體",
     "# Memories: Photo Management for Nextcloud\n\nMemories is a *batteries-included* photo management solution for Nextcloud with advanced features including:\n\n- **📸 Timeline**: Sort photos and videos by date taken, parsed from Exif data.\n- **⏪ Rewind**: Jump to any time in the past instantly and relive your memories.\n- **🤖 AI Tagging**: Group photos by people and objects, powered by [recognize](https://github.com/nextcloud/recognize) and [facerecognition](https://github.com/matiasdelellis/facerecognition).\n- **🖼️ Albums**: Create albums to group photos and videos together. Then share these albums with others.\n- **🫱🏻‍🫲🏻 External Sharing**: Share photos and videos with people outside of your Nextcloud instance.\n- **📱 Mobile Support**: Work from any device, of any shape and size through the web app.\n- **✏️ Edit Metadata**: Edit dates and other metadata on photos quickly and in bulk.\n- **📦 Archive**: Store photos you don't want to see in your timeline in a separate folder.\n- **📹 Video Transcoding**: Transcode videos and use HLS for maximal performance.\n- **🗺️ Map**: View your photos on a map, tagged with accurate reverse geocoding.\n- **📦 Migration**: Migrate easily from Nextcloud Photos and Google Takeout.\n- **⚡️ Performance**: Do all this very fast.\n\n## 🚀 Installation\n\n1. Install the app from the Nextcloud app store (try a demo [here](https://memories-demo.radialapps.com/apps/memories/)).\n1. Perform the recommended [configuration steps](https://github.com/pulsejet/memories/wiki/Configuration).\n1. Run `php occ memories:index` to generate metadata indices for existing photos.\n1. Open the 📷 Memories app in Nextcloud and set the directory containing your photos." : "# 回憶：Nextcloud 的照片管理程式\n\n回憶是一個有進階功能的 *超強* Nextcloud 相片管理解決方案，包含了以下功能：\n\n- **📸 時間軸**：從 Exif 資料中按拍攝日期對照片與影片進行排序。\n- **⏪ 倒帶**：立刻跳回過去的任何時間，重溫您的回憶。\n- **🤖 AI 標記**：使用 [recognize](https://github.com/nextcloud/recognize) 與 [facerecognition](https://github.com/matiasdelellis/facerecognition) 應用程式提供的按人物與物體對照片進行分組。\n- **🖼️ 相簿**：建立相簿以將照片與影片分組。然後將這些相簿與其他人分享。\n- **🫱🏻‍🫲🏻 外部分享**：與您 Nextcloud 站台以外的人們分享照片與影片。\n- **📱 行動裝置支援**：透過網路應用程式在任何形狀與大小的裝置上運作。\n- **✏️ 編輯詮釋資料**：快速輕鬆地批次編輯照片上的日期與其他詮釋資料。\n- **📦 封存**：將您不想在時間軸中看到的照片儲存在單獨的資料夾中。\n- **📹 視訊轉換編碼**：轉換視訊編碼並使用 HLS 來取得最大效能。\n- **🗺️ 地圖**：在地圖上檢視您的照片，並使用準確的反向地理編碼來標記。\n- **📦 遷移**：從 Nextcloud Photos 與 Google Takeout 簡易遷移。\n- **⚡️ 效能**：這些功能都超快。\n\n## 🚀 安裝\n\n- 想看看本應用程式的外觀與感覺，請見[公開展示](https://memories-demo.radialapps.com/apps/memories/).\n- 展示站是唯讀的，可能會有點慢（來自 [Oracle Cloud](https://www.oracle.com/cloud/free/) 的免費層級虛擬機器）。\n- 照片則歸功於 [Unsplash](https://unsplash.com/)（若要檢視單獨的署名，請參見每個資料夾中的資訊）。\n\n\n## 🚀 安裝\n1. 從 Nextcloud 應用程式商店安裝應用程式（[在此](https://memories-demo.radialapps.com/apps/memories/)試用展示版本）。\n1. 執行建議的[設定步驟](https://github.com/pulsejet/memories/wiki/Configuration)。\n1. 執行 `php occ memories:index` 以產生既有照片的詮釋資料索引。\n1. 在 Nextcloud 中開啟 📷 回憶應用程式，並設定包含您照片的目錄。",
+    "Path to packaged exiftool binary" : "打包好的 exiftool 二進位檔路徑",
+    "ffmpeg path" : "ffmpeg 路徑",
+    "ffprobe path" : "ffprobe 路徑",
+    "Binary path (local only)" : "二進位檔路徑（僅本機）",
+    "Bind address (local only)" : "綁定地址（僅本機）",
+    "Connection address (same as bind if local)" : "連線地址（若為本機的話，則與綁定相同）",
+    "EXIF Extraction" : "EXIF 解壓縮",
+    "Use system perl (only if packaged binary does not work)" : "使用系統 perl（僅若打包好的二進位檔無法運作時）",
+    "Reverse Geocoding" : "反向地理編碼",
+    "Database is populated with {n} geometries" : "資料庫中填充了 {n} 個幾何圖形",
+    "Geometry table has not been created" : "尚未建立幾何圖形表格",
+    "Reverse geocoding has not been configured ({gisType})." : "尚未設定反向地理編碼（{gisType}）。",
+    "Memories supports offline reverse geocoding using the OpenStreetMaps data on MySQL and Postgres." : "Memories 支援使用 MySQL 與 Postgres 上的 OpenStreetMap 資料進行離線反向地理編碼。",
+    "You need to download the planet data into your database. This is highly recommended and has low overhead." : "您需要將地球資料下載到您的資料庫中。強烈推薦此方式且其開銷很低。",
+    "If the button below does not work for importing the planet data, use " : "若下方按鈕無法匯入地球資料，請使用",
+    "Note: the geometry data is stored in the " : "注意：幾何資料儲存在",
+    "Download planet database" : "下載地球資料庫",
+    "Video Streaming" : "視訊串流",
+    "Live transcoding provides for adaptive streaming of videos using HLS." : "即時轉換編碼使用 HLS 提供自動調整串流。",
+    "Note that this may be very CPU intensive without hardware acceleration, and transcoding will not be used for external storage." : "請注意，若無硬體加速，這可能會讓 CPU 有非常高的使用率，且轉換編碼不會用於外部儲存空間。",
+    "Enable Transcoding" : "啟用轉換編碼",
+    "Global default video quality (user may override)" : "全域預設影片品質（使用者可以覆寫）",
+    "Auto (adaptive transcode)" : "自動（自動調整轉碼）",
+    "Original (transcode with max quality)" : "原始（使用最高品質轉碼）",
+    "Direct (original video file without transcode)" : "直接（沒有轉碼的原始影片檔案）",
+    "Transcoder configuration" : "轉碼器設定",
+    "Memories uses the go-vod transcoder. You can run go-vod exernally (e.g. in a separate Docker container for hardware acceleration) or use the built-in transcoder. To use an external transcoder, enable the following option and follow the instructions at this link:" : "Memories 使用 go-vod 轉碼器。您可以在外部執行 go-vod（例如，在單獨的 Docker 容器中進行硬體加速）或使用內建的轉碼器。要使用外部轉碼器，請啟用以下選項並按照此連結中的說明進行操作：",
+    "external transcoder configuration" : "外部轉碼器設定",
+    "Enable external transcoder (go-vod)" : "啟用外部轉碼器 (go-vod)",
+    "Hardware Acceleration" : "硬體加速",
+    "You must first make sure the correct drivers are installed before configuring acceleration." : "在設定加速之前，您必須先確保安裝了正確的驅動程式。",
+    "Make sure you test hardware acceleration with various options after enabling." : "確保在啟用後使用各種選項測試硬體加速。",
+    "Do not enable multiple types of hardware acceleration simultaneously." : "不要同時啟用多種類型的硬體加速。",
+    "Intel processors supporting QuickSync Video (QSV) as well as some AMD GPUs can be used for transcoding using VA-API acceleration." : "支援 QuickSync Video (QSV) 的 Intel 處理器以及一些 AMD GPU 可使用 VA-API 加速進行轉碼。",
+    "For more details on driver installation, check the following link:" : "關於更多驅動程式安裝的資訊，請看以下連結：",
+    "Enable acceleration with VA-API" : "啟用 VA-API 加速",
+    "Enable low-power mode (QSV)" : "啟用低功率模式 (QSV)",
+    "NVIDIA GPUs can be used for transcoding using the NVENC encoder with the proper drivers." : "NVIDIA GPU 可用於使用帶有適當驅動程式的 NVENC 編碼器進行轉碼。",
+    "Depending on the versions of the installed SDK and ffmpeg, you need to specify the scaler to use" : "取決於安裝的 SDK 與 ffmpeg 版本，您可能需要指定要使用的 scaler",
+    "No automated tests are available for NVIDIA acceleration." : "未提供 NVIDIA 加速的自動化測試",
+    "Enable acceleration with NVENC" : "啟用 NVENC 加速",
+    "Enable NVENC Temporal AQ" : "啟用 NVENC 臨時 AQ",
+    "NPP scaler" : "NPP scaler",
+    "CUDA scaler" : "CUDA scaler",
+    "Failed to update setting" : "更新設定失敗",
+    "{name} binary exists and is executable" : "{name} 二進位檔案存在且可執行",
+    "{name} binary not found" : "找不到 {name} 二進位檔",
+    "{name} binary is not executable" : "{name} 二進位檔不是可執行檔",
+    "{name} failed test: {info}" : "{name} 測試失敗：{info}",
+    "{name} binary exists and is usable" : "{name} 二進位檔案存在且可使用",
+    "{name} binary status: {status}" : "{name} 二進位檔狀態：{status}",
+    "Geometry support was not detected in your database" : "您的資料庫中並未偵測到幾何支援",
+    "MySQL-like geometry support was detected " : "偵測到類 MySQL 的幾何支援",
+    "Postgres native geometry support was detected" : "偵測到 Postgres 的原生幾何支援",
+    "VA-API device ({dev}) is readable" : "VA-API 裝置（{dev}）可讀",
+    "VA-API device ({dev}) not found" : "找不到 VA-API 裝置（{dev}）",
+    "VA-API device ({dev}) has incorrect permissions" : "VA-API 裝置（{dev}）權限不正確",
+    "VA-API device status: {status}" : "VA-API 裝置狀態：{status}",
     "Settings" : "設定",
     "People (Recognize)" : "人物 (Recognize)",
     "People" : "人物",
diff --git a/l10n/zh_TW.json b/l10n/zh_TW.json
index e7339ea1..96c22ee0 100644
--- a/l10n/zh_TW.json
+++ b/l10n/zh_TW.json
@@ -2,6 +2,64 @@
     "Memories" : "回憶",
     "Fast, modern and advanced photo management suite" : "快速、現代且進階的照片管理套裝軟體",
     "# Memories: Photo Management for Nextcloud\n\nMemories is a *batteries-included* photo management solution for Nextcloud with advanced features including:\n\n- **📸 Timeline**: Sort photos and videos by date taken, parsed from Exif data.\n- **⏪ Rewind**: Jump to any time in the past instantly and relive your memories.\n- **🤖 AI Tagging**: Group photos by people and objects, powered by [recognize](https://github.com/nextcloud/recognize) and [facerecognition](https://github.com/matiasdelellis/facerecognition).\n- **🖼️ Albums**: Create albums to group photos and videos together. Then share these albums with others.\n- **🫱🏻‍🫲🏻 External Sharing**: Share photos and videos with people outside of your Nextcloud instance.\n- **📱 Mobile Support**: Work from any device, of any shape and size through the web app.\n- **✏️ Edit Metadata**: Edit dates and other metadata on photos quickly and in bulk.\n- **📦 Archive**: Store photos you don't want to see in your timeline in a separate folder.\n- **📹 Video Transcoding**: Transcode videos and use HLS for maximal performance.\n- **🗺️ Map**: View your photos on a map, tagged with accurate reverse geocoding.\n- **📦 Migration**: Migrate easily from Nextcloud Photos and Google Takeout.\n- **⚡️ Performance**: Do all this very fast.\n\n## 🚀 Installation\n\n1. Install the app from the Nextcloud app store (try a demo [here](https://memories-demo.radialapps.com/apps/memories/)).\n1. Perform the recommended [configuration steps](https://github.com/pulsejet/memories/wiki/Configuration).\n1. Run `php occ memories:index` to generate metadata indices for existing photos.\n1. Open the 📷 Memories app in Nextcloud and set the directory containing your photos." : "# 回憶：Nextcloud 的照片管理程式\n\n回憶是一個有進階功能的 *超強* Nextcloud 相片管理解決方案，包含了以下功能：\n\n- **📸 時間軸**：從 Exif 資料中按拍攝日期對照片與影片進行排序。\n- **⏪ 倒帶**：立刻跳回過去的任何時間，重溫您的回憶。\n- **🤖 AI 標記**：使用 [recognize](https://github.com/nextcloud/recognize) 與 [facerecognition](https://github.com/matiasdelellis/facerecognition) 應用程式提供的按人物與物體對照片進行分組。\n- **🖼️ 相簿**：建立相簿以將照片與影片分組。然後將這些相簿與其他人分享。\n- **🫱🏻‍🫲🏻 外部分享**：與您 Nextcloud 站台以外的人們分享照片與影片。\n- **📱 行動裝置支援**：透過網路應用程式在任何形狀與大小的裝置上運作。\n- **✏️ 編輯詮釋資料**：快速輕鬆地批次編輯照片上的日期與其他詮釋資料。\n- **📦 封存**：將您不想在時間軸中看到的照片儲存在單獨的資料夾中。\n- **📹 視訊轉換編碼**：轉換視訊編碼並使用 HLS 來取得最大效能。\n- **🗺️ 地圖**：在地圖上檢視您的照片，並使用準確的反向地理編碼來標記。\n- **📦 遷移**：從 Nextcloud Photos 與 Google Takeout 簡易遷移。\n- **⚡️ 效能**：這些功能都超快。\n\n## 🚀 安裝\n\n- 想看看本應用程式的外觀與感覺，請見[公開展示](https://memories-demo.radialapps.com/apps/memories/).\n- 展示站是唯讀的，可能會有點慢（來自 [Oracle Cloud](https://www.oracle.com/cloud/free/) 的免費層級虛擬機器）。\n- 照片則歸功於 [Unsplash](https://unsplash.com/)（若要檢視單獨的署名，請參見每個資料夾中的資訊）。\n\n\n## 🚀 安裝\n1. 從 Nextcloud 應用程式商店安裝應用程式（[在此](https://memories-demo.radialapps.com/apps/memories/)試用展示版本）。\n1. 執行建議的[設定步驟](https://github.com/pulsejet/memories/wiki/Configuration)。\n1. 執行 `php occ memories:index` 以產生既有照片的詮釋資料索引。\n1. 在 Nextcloud 中開啟 📷 回憶應用程式，並設定包含您照片的目錄。",
+    "Path to packaged exiftool binary" : "打包好的 exiftool 二進位檔路徑",
+    "ffmpeg path" : "ffmpeg 路徑",
+    "ffprobe path" : "ffprobe 路徑",
+    "Binary path (local only)" : "二進位檔路徑（僅本機）",
+    "Bind address (local only)" : "綁定地址（僅本機）",
+    "Connection address (same as bind if local)" : "連線地址（若為本機的話，則與綁定相同）",
+    "EXIF Extraction" : "EXIF 解壓縮",
+    "Use system perl (only if packaged binary does not work)" : "使用系統 perl（僅若打包好的二進位檔無法運作時）",
+    "Reverse Geocoding" : "反向地理編碼",
+    "Database is populated with {n} geometries" : "資料庫中填充了 {n} 個幾何圖形",
+    "Geometry table has not been created" : "尚未建立幾何圖形表格",
+    "Reverse geocoding has not been configured ({gisType})." : "尚未設定反向地理編碼（{gisType}）。",
+    "Memories supports offline reverse geocoding using the OpenStreetMaps data on MySQL and Postgres." : "Memories 支援使用 MySQL 與 Postgres 上的 OpenStreetMap 資料進行離線反向地理編碼。",
+    "You need to download the planet data into your database. This is highly recommended and has low overhead." : "您需要將地球資料下載到您的資料庫中。強烈推薦此方式且其開銷很低。",
+    "If the button below does not work for importing the planet data, use " : "若下方按鈕無法匯入地球資料，請使用",
+    "Note: the geometry data is stored in the " : "注意：幾何資料儲存在",
+    "Download planet database" : "下載地球資料庫",
+    "Video Streaming" : "視訊串流",
+    "Live transcoding provides for adaptive streaming of videos using HLS." : "即時轉換編碼使用 HLS 提供自動調整串流。",
+    "Note that this may be very CPU intensive without hardware acceleration, and transcoding will not be used for external storage." : "請注意，若無硬體加速，這可能會讓 CPU 有非常高的使用率，且轉換編碼不會用於外部儲存空間。",
+    "Enable Transcoding" : "啟用轉換編碼",
+    "Global default video quality (user may override)" : "全域預設影片品質（使用者可以覆寫）",
+    "Auto (adaptive transcode)" : "自動（自動調整轉碼）",
+    "Original (transcode with max quality)" : "原始（使用最高品質轉碼）",
+    "Direct (original video file without transcode)" : "直接（沒有轉碼的原始影片檔案）",
+    "Transcoder configuration" : "轉碼器設定",
+    "Memories uses the go-vod transcoder. You can run go-vod exernally (e.g. in a separate Docker container for hardware acceleration) or use the built-in transcoder. To use an external transcoder, enable the following option and follow the instructions at this link:" : "Memories 使用 go-vod 轉碼器。您可以在外部執行 go-vod（例如，在單獨的 Docker 容器中進行硬體加速）或使用內建的轉碼器。要使用外部轉碼器，請啟用以下選項並按照此連結中的說明進行操作：",
+    "external transcoder configuration" : "外部轉碼器設定",
+    "Enable external transcoder (go-vod)" : "啟用外部轉碼器 (go-vod)",
+    "Hardware Acceleration" : "硬體加速",
+    "You must first make sure the correct drivers are installed before configuring acceleration." : "在設定加速之前，您必須先確保安裝了正確的驅動程式。",
+    "Make sure you test hardware acceleration with various options after enabling." : "確保在啟用後使用各種選項測試硬體加速。",
+    "Do not enable multiple types of hardware acceleration simultaneously." : "不要同時啟用多種類型的硬體加速。",
+    "Intel processors supporting QuickSync Video (QSV) as well as some AMD GPUs can be used for transcoding using VA-API acceleration." : "支援 QuickSync Video (QSV) 的 Intel 處理器以及一些 AMD GPU 可使用 VA-API 加速進行轉碼。",
+    "For more details on driver installation, check the following link:" : "關於更多驅動程式安裝的資訊，請看以下連結：",
+    "Enable acceleration with VA-API" : "啟用 VA-API 加速",
+    "Enable low-power mode (QSV)" : "啟用低功率模式 (QSV)",
+    "NVIDIA GPUs can be used for transcoding using the NVENC encoder with the proper drivers." : "NVIDIA GPU 可用於使用帶有適當驅動程式的 NVENC 編碼器進行轉碼。",
+    "Depending on the versions of the installed SDK and ffmpeg, you need to specify the scaler to use" : "取決於安裝的 SDK 與 ffmpeg 版本，您可能需要指定要使用的 scaler",
+    "No automated tests are available for NVIDIA acceleration." : "未提供 NVIDIA 加速的自動化測試",
+    "Enable acceleration with NVENC" : "啟用 NVENC 加速",
+    "Enable NVENC Temporal AQ" : "啟用 NVENC 臨時 AQ",
+    "NPP scaler" : "NPP scaler",
+    "CUDA scaler" : "CUDA scaler",
+    "Failed to update setting" : "更新設定失敗",
+    "{name} binary exists and is executable" : "{name} 二進位檔案存在且可執行",
+    "{name} binary not found" : "找不到 {name} 二進位檔",
+    "{name} binary is not executable" : "{name} 二進位檔不是可執行檔",
+    "{name} failed test: {info}" : "{name} 測試失敗：{info}",
+    "{name} binary exists and is usable" : "{name} 二進位檔案存在且可使用",
+    "{name} binary status: {status}" : "{name} 二進位檔狀態：{status}",
+    "Geometry support was not detected in your database" : "您的資料庫中並未偵測到幾何支援",
+    "MySQL-like geometry support was detected " : "偵測到類 MySQL 的幾何支援",
+    "Postgres native geometry support was detected" : "偵測到 Postgres 的原生幾何支援",
+    "VA-API device ({dev}) is readable" : "VA-API 裝置（{dev}）可讀",
+    "VA-API device ({dev}) not found" : "找不到 VA-API 裝置（{dev}）",
+    "VA-API device ({dev}) has incorrect permissions" : "VA-API 裝置（{dev}）權限不正確",
+    "VA-API device status: {status}" : "VA-API 裝置狀態：{status}",
     "Settings" : "設定",
     "People (Recognize)" : "人物 (Recognize)",
     "People" : "人物",