* add new directive in the global scope `certificates_directory` which is used to bulk load certs and trust them in Authelia
* this is in ADDITION to system certs and are trusted by both LDAP and SMTP
* added a shared TLSConfig struct to be used by both SMTP and LDAP, and anything else in the future that requires tuning the TLS
* remove usage of deprecated LDAP funcs Dial and DialTLS in favor of DialURL which is also easier to use
* use the server name from LDAP URL or SMTP host when validating the certificate unless otherwise defined in the TLS section
* added temporary translations from the old names to the new ones for all deprecated options
* added docs
* updated example configuration
* final deprecations to be done in 4.28.0
* doc updates
* fix misc linting issues
* uniform deprecation notices for ease of final removal
* added additional tests covering previously uncovered areas and the new configuration options
* add non-fatal to certificate loading when system certs could not be loaded
* adjust timeout of Suite ShortTimeouts
* add warnings pusher for the StructValidator
* make the schema suites uninform
* utilize the warnings in the StructValidator
* fix test suite usage for skip_verify
* extract LDAP filter parsing into it's own function to make it possible to test
* test LDAP filter parsing
* update ErrorContainer interface
* add tests to the StructValidator
* add NewTLSConfig test
* move baseDN for users/groups into parsed values
* add tests to cover many of the outstanding areas in LDAP
* add explicit deferred LDAP conn close to UpdatePassword
* add some basic testing to SMTP notifier
* suggestions from code review
* add start_tls config option
* add StartTLS method to the LDAP conn factory and the mock
* implemented use of the StartTLS method when the config is set to true
* add mock unit tests
* add docs
* add TLS min version support
* add tests to tls version method
* fix lint issues
* minor adjustments
* remove SSL3.0
* add tls consts
* deprecate old filter placeholders
* remove redundant fake hashing in file auth provider (to delay username enumeration, was replaced by #993
* make suite ActiveDirectory use StartTLS
* misc adjustments to docs
* suggested changes from code review
* deprecation notice conformity
* add mock test for LDAPS plus StartTLS
* [BUGFIX] Make username_attribute a mandatory placeholder in users_filter
Not including the `username_attribute` in the `users_filter` will cause issues with the LDAP session refresh and will result in session resets when the refresh interval has expired.
This change makes said attribute mandatory for the `users_filter`.
* Update version referenced in docs for fix
* Added `ActiveDirectory` suite for integration tests with Samba AD
* Updated documentation
* Minor styling refactor to suites
* Clean up LDAP user provisioning
* Fix Authelia home splash to reference correct link for webmail
* Add notification message for password complexity errors
* Add password complexity integration test
* Rename implementation default from rfc to custom
* add specific defaults for LDAP (activedirectory implementation)
* add docs to show the new defaults
* add docs explaining the importance of users filter
* add tests
* update instances of LDAP implementation names to use the new consts where applicable
* made the 'custom' case in the UpdatePassword method for the implementation switch the default case instead
* update config examples due to the new defaults
* apply changes from code review
* replace schema default name from MSAD to ActiveDirectory for consistency
* fix missing default for username_attribute
* replace test raising on empty username attribute with not raising on empty
Co-authored-by: James Elliott <james-d-elliott@users.noreply.github.com>
This change adds the ability to format Authelia's log output as JSON.
Example below:
```
{"level":"info","msg":"Logging severity set to info","time":"2020-01-01T00:00:00+11:00"}
{"level":"info","msg":"Authelia is listening for non-TLS connections on 0.0.0.0:9091","time":"2020-01-01T00:00:00+11:00"}
```
* [MISC] Append log file instead of overwriting
If Authelia is restarted when a `log_file_path` is defined upon restart the log file is overwritten as opposed to appending the existing file.
This change ensures that the log file will be appended to, users will need to ensure that they rotate/truncate this over time especially if running in `debug` or `trace`.
* Amend documentation for log_file_path
* add a plain text email template
* use plain text email template for file based emails
* add config option to SMTP emails named disable_html_emails
* config option is a boolean that when set to true will only send plain text emails
* add docs for more complex SMTP notifier options
* update template
* add rfc1341 multipart logic to notifier
* check for errors after identity_verification
* * fix nil ptr
* go mod tidy
* remove needless checks
* * use multipart/atlernative instead
* * add rfc5322 compliant date header
* * fix linting issues
* [FEATURE] Add configurable display name to frontend
This feature allows users with a LDAP backend to specify an attribute (default is "displayname") to retrieve a users name for the portal greeting.
Similarly for the file based backend a new required key "name" has been introduced.
This can also be used down the line with OIDC as a separate scope.
* Update references from Name to DisplayName
* Update compose bundles to include displayname refs
* Update LDAP automatic profile refresh
* Ensure display name is updated
* Fix bug which prevented trace logging for profile refresh to not trigger
* [FEATURE] Docker simplification and configuration generation
The Authelia binary now will attempt to generate configuration based on the latest template assuming that the config location specified on startup does not exist. If a file based backend is selected and the backend cannot be found similarly it will generate a `user_database.yml` based a template.
This will allow more seamless bootstrapping of an environment no matter the deployment method.
We have also squashed the Docker volume requirement down to just `/config` thus removing the requirement for `/var/lib/authelia` this is primarily in attempts to simplify the Docker deployment.
Users with the old volume mappings have two options:
1. Change their mappings to conform to `/config`
2. Change the container entrypoint from `authelia --config /config/configuration.yml` to their old mapping
* Adjust paths relative to `/etc/authelia` and simplify to single volume for compose
* Add generation for file backend based user database
* Refactor Docker volumes and paths to /config
* Refactor Docker WORKDIR to /app
* Fix integration tests
* Update BREAKING.md for v4.20.0
* Run go mod tidy
* Fix log_file_path in miscellaneous.md docs
* Generate config and userdb with 0600 permissions
* Fix log_file_path in config.template.yml
* [FEATURE] Allow Authelia to listen on a specified path
* Fix linting and add a couple typescript types
* Template index.html to support base_url
* Update docs and configuration template
* Access base path from body attribute.
* Update CSP
* Fix unit test
Also remove check for body as this will never get triggered, react itself is loaded inside the body so this has to always be successful.
* Template index.html with ${PUBLIC_URL}
* Define PUBLIC_URL in .env(s)
* Add docs clarification
Co-authored-by: Amir Zarrinkafsh <nightah@me.com>
Co-authored-by: Clement Michaud <clement.michaud34@gmail.com>
* [FEATURE] Bump to fasthttp/session/v2 to support redis unix socket.
* Fix lint issues.
* Remove v1 import and fix double import.
* [DOCS] Document use of redis unix socket.
Co-authored-by: Amir Zarrinkafsh <nightah@me.com>
* it doesn't work with our current CSP
* it's probably not used by anyone
* it isn't in harmony with our security purposes
* literally removes all use of it
* suggestions from code review
* remove useless test.
Co-authored-by: Amir Zarrinkafsh <nightah@me.com>
Co-authored-by: Clement Michaud <clement.michaud34@gmail.com>
* [FIX] LDAP Not Checking for Updated Groups
* refactor handlers verifyFromSessionCookie
* refactor authorizer selectMatchingObjectRules
* refactor authorizer isDomainMatching
* add authorizer URLHasGroupSubjects method
* add user provider ProviderType method
* update tests
* check for new LDAP groups and update session when:
* user provider type is LDAP
* authorization is forbidden
* URL has rule with group subjects
* Implement Refresh Interval
* add default values for LDAP user provider
* add default for refresh interval
* add schema validator for refresh interval
* add various tests
* rename hasUserBeenInactiveLongEnough to hasUserBeenInactiveTooLong
* use Authelia ctx clock
* add check to determine if user is deleted, if so destroy the
* make ldap user not found error a const
* implement GetRefreshSettings in mock
* Use user not found const with FileProvider
* comment exports
* use ctx.Clock instead of time pkg
* add debug logging
* use ptr to reference userSession so we don't have to retrieve it again
* add documenation
* add check for 0 refresh interval to reduce CPU cost
* remove badly copied debug msg
* add group change delta message
* add SliceStringDelta
* refactor ldap refresh to use the new func
* improve delta add/remove log message
* fix incorrect logic in SliceStringDelta
* add tests to SliceStringDelta
* add always config option
* add tests for always config option
* update docs
* apply suggestions from code review
Co-Authored-By: Amir Zarrinkafsh <nightah@me.com>
* complete mocks and fix an old one
* show warning when LDAP details failed to update for an unknown reason
* golint fix
* actually fix existing mocks
* use mocks for LDAP refresh testing
* use mocks for LDAP refresh testing for both added and removed groups
* use test mock to verify disabled refresh behaviour
* add information to threat model
* add time const for default Unix() value
* misc adjustments to mocks
* Suggestions from code review
* requested changes
* update emails
* docs updates
* test updates
* misc
* golint fix
* set debug for dev testing
* misc docs and logging updates
* misc grammar/spelling
* use built function for VerifyGet
* fix reviewdog suggestions
* requested changes
* Apply suggestions from code review
Co-authored-by: Amir Zarrinkafsh <nightah@me.com>
Co-authored-by: Clément Michaud <clement.michaud34@gmail.com>
* [FEATURE] Config Validation
* check configuration for invalid keys on startup
* allow users to manually trigger all configuration validation on a file using a cmd
* setup all defaults in config template and run tests against it to prevent accidents
* use tests to check bad configuration values are caught
* use tests to check old configuration values are caught
* add tests for specific key errors
* resolve merge conflicts
* nolint prealloc for test
* [FEATURE] File Secret Loading
* add a validator for secrets
* run the secrets validator before the main config validator
* only allow a secret to be defined in one of: config, env, file env
* remove LF if found in file
* update configuration before main config validation
* fix unit tests
* implement secret testing
* refactor the secrets validator
* make check os agnostic
* update docs
* add warning when user attempts to use ENV instead of ENV file
* discourage ENV in docs
* update config template
* oxford comma
* apply suggestions from code review
* rename Validate to ValidateConfiguration
* add k8s example
* add deprecation notice in docs and warning
* style changes
* implement SMTP notifier startup check
* check dial, starttls, auth, mail from, rcpt to, reset, and quit
* log the error on failure
* implement mock
* misc optimizations, adjustments, and refactoring
* implement validate_skip config option
* fix comments to end with period
* fix suites that used smtp notifier without a smtp container
* add docs
* add file notifier startup check
* move file mode into const.go
* disable gosec linting on insecureskipverify since it's intended, warned, and discouraged
* minor PR commentary adjustment
* apply suggestions from code review
Co-Authored-By: Amir Zarrinkafsh <nightah@me.com>
* added support for listing multiple domains and multiple subjects
* updated documentation to show use of multiple domains and subjects
* updated config.template.yml to display multiple domains as a list
* updated config.template.yml to display multiple subjects as a list
* updated docs/configuration/access-control.md to display multiple domains as a list
* updated docs/configuration/access-control.md to display multiple subjects as a list
* removed redundant check that always returned true
* Commentary definition for `weak`
* add a nolint for gosec 'possibly hardcoded password' that was incorrect
* make all parameters consistent
* update the docs for the correct key name 'password' instead of 'password_options' or 'password_hashing'
* reword some of the docs
* apply suggestions from code review
Co-Authored-By: Amir Zarrinkafsh <nightah@me.com>
* [FEATURE] Customizable Email Subject
* allow users to optionally change email subject
* this is so they can more easily communicate the source of the email
* Update docs/configuration/notifier/smtp.md
Co-Authored-By: Amir Zarrinkafsh <nightah@me.com>
Co-authored-by: Clément Michaud <clement.michaud34@gmail.com>
Co-authored-by: Amir Zarrinkafsh <nightah@me.com>
* added regulation validator
* made regulations find_time and ban_time values duration notation strings
* added DefaultRegulationConfiguration for the validator
* made session expiration and inactivity values duration notation strings
* TOTP period does not need to be converted because adjustment should be discouraged
* moved TOTP defaults to DefaultTOTPConfiguration and removed the consts
* arranged the root config validator in configuration file order
* adjusted tests for the changes
* moved duration notation docs to root of configuration
* added references to duration notation where applicable
* project wide gofmt and goimports:
* run gofmt
* run goimports -local github.com/authelia/authelia -w on all files
* Make jwt_secret error uniform and add tests
* now at 100% coverage for internal/configuration/validator/configuration.go
* [FEATURE] Disable Reset Password
* add configuration key to authentication_backend called disable_reset_password
* disable_reset_password prevents the API handler for the functionality and the UI element
* disable_reset_password is a boolean
* adjust RememberMeEnabled to be RememberMe instead as it's just unnecessary
* add docs for security measures and in the authentication docs
* updated config.template.yml
* add flexEnd style to align reset password when remember me disabled
* add todo items for ldap user/password validation relating to this
* [FEATURE] Remember Me Configuration
* allow users to specify the duration of remember me using remember_me_duration in session config
* setting the duration to 0 disables remember me
* only render the remember me element if remember me is enabled
* prevent malicious users from faking remember me functionality in the backend
* add string to duration helper called ParseDurationString to parse a string into a duration
* added tests to the helper function
* use the SessionProvider to store the time.Duration instead of parsing it over and over again
* add sec doc, adjust month/min, consistency
* renamed internal/utils/constants.go to internal/utils/const.go to be consistent
* added security measure docs
* adjusted default remember me duration to be 1 month instead of 1 year
* utilize default remember me duration in the autheliaCtx mock
* adjust order of keys in session configuration examples
* add notes on session security measures secret only being redis
* add TODO items for duration notation for both Expiration and Inactivity (will be removed soon)
* fix error text for Inactivity in the validator
* add session validator tests
* deref check bodyJSON.KeepMeLoggedIn and derive the value based on conf and user input and store it (DRY)
* remove unnecessary regex for the simplified ParseDurationString utility
* ParseDurationString only accepts decimals without leading zeros now
* comprehensively test all unit types
* remove unnecessary type unions in web
* add test to check sanity of time duration consts, this is just so they can't be accidentally changed
* simplify deref check and assignment
* fix reset password padding/margins
* adjust some doc wording
* adjust the handler configuration suite test
* actually run the handler configuration suite test (whoops)
* reduce the number of regex's used by ParseDurationString to 1, thanks to Clement
* adjust some error wording
* [FEATURE][BREAKING] Allow users to sign in with email.
The users_filter purpose evolved with the introduction of username_attribute
but is reverted here to allow the most flexibility. users_filter is now the
actual filter used for searching the user and not a sub-filter based on the
username_attribute anymore.
* {input} placeholder has been introduced to later deprecate {0} which has been
kept for backward compatibility.
* {username_attribute} and {mail_attribute} are new placeholders used to back
reference other configuration options.
Fix#735
* [MISC] Introduce new placeholders for groups_filter too.
* [MISC] Update BREAKING.md to mention the change regarding users_filter.
* [MISC] Fix unit and integration tests.
* Log an error message in console when U2F is not supported.
* Apply suggestions from code review
* Update BREAKING.md
Co-authored-by: James Elliott <james-d-elliott@users.noreply.github.com>
Co-authored-by: Amir Zarrinkafsh <nightah@me.com>
* Add period TOPT config key to define the time in seconds each OTP is rotated
* Add skew TOTP config to define how many keys either side of the current one should be considered valid
* Add tests and set minimum values
* Update config template
* Use unix epoch for position calculation and Fix QR gen
* This resolves the timer resetting improperly at the 0 seconds mark and allows for periods longer than 1 minute
* Generate QR based on period
* Fix OTP timer graphic
* [BUGFIX] Set username retrieved from authentication backend in session.
In some setups, binding is case insensitive but Authelia is case
sensitive and therefore need the actual username as stored in the
authentication backend in order for Authelia to work correctly.
Fixes#561.
* Use uid attribute as unique user identifier in suites.
* Fix the integration tests.
* Update config.template.yml
* Compute user filter based on username attribute and users_filter.
The filter provided in users_filter is now combined with a filter
based on the username attribute to perform the LDAP search query
finding a user object from the username.
* Fix LDAP based integration tests.
* Update `users_filter` reference examples
* [FEATURE] Support writing logs in a file.
* Add documentation about logs file path.
* Rename logs_level and logs_file_path into log_level and log_file_path.
* Update BREAKING.md
Fixes#338
Co-authored-by: Amir Zarrinkafsh <nightah@me.com>
* [MISC] Update Golang and QEMU to v1.14.0 and v4.2.0-6 respectively
* Argon2id memory in MB for Config Template
* Doc Fix
Co-authored-by: James Elliott <james-d-elliott@users.noreply.github.com>
* [FEATURE] Support Argon2id Passwords
- Updated go module github.com/simia-tech/crypt
- Added Argon2id support for file based authentication backend
- Made it the default method
- Made it so backwards compatibility with SHA512 exists
- Force seeding of the random string generator used for salts to ensure they are all different
- Added command params to the authelia hash-password command
- Automatically remove {CRYPT} from hashes as they are updated
- Automatically change hashes when they are updated to the configured algorithm
- Made the hashing algorithm parameters completely configurable
- Added reasonably comprehensive test suites
- Updated docs
- Updated config template
* Adjust error output
* Fix unit test
* Add unit tests and argon2 version check
* Fix new unit tests
* Update docs, added tests
* Implement configurable values and more comprehensive testing
* Added cmd params to hash_password, updated docs, misc fixes
* More detailed error for cmd, fixed a typo
* Fixed cmd flag error, minor refactoring
* Requested Changes and Minor refactoring
* Increase entropy
* Update docs for entropy changes
* Refactor to reduce nesting and easier code maintenance
* Cleanup Errors (uniformity for the function call)
* Check salt length, fix docs
* Add Base64 string validation for argon2id
* Cleanup and Finalization
- Moved RandomString function from ./internal/authentication/password_hash.go to ./internal/utils/strings.go
- Added SplitStringToArrayOfStrings func that splits strings into an array with a fixed max string len
- Fixed an error in validator that would allow a zero salt length
- Added a test to verify the upstream crypt module supports our defined random salt chars
- Updated docs
- Removed unused "HashingAlgorithm" string type
* Update crypt go mod, support argon2id key length and major refactor
* Config Template Update, Final Tests
* Use schema defaults for hash-password cmd
* Iterations check
* Docs requested changes
* Test Coverage, suggested edits
* Wording edit
* Doc changes
* Default sanity changes
* Default sanity changes - docs
* CI Sanity changes
* Memory in MB
* [FEATURE] Add TLS support.
Fixes#368.
* [FEATURE] Introduce OnError hook in suites.
This hook allows to perform actions following an erroneous suite
like displaying the logs of Authelia.
* Display Authelia logs of Standalone suite when tests fail.
* Fix Standalone suite.
* Apply suggestions from code review
* Rename ssl_key and ssl_cert into tls_key and tls_cert.
* [FEATURE] Redis DB Number Selection
- Allow users to specify the DB number
- This is so users who use their redis for multiple purposes can have clear demarcation between their data
* revert: import order
* Add default/example to config template with docs
* Set DB Index property name to be more clear
* Remove unused mongo docker-compose file.
* Default redirection URL was not taken into account.
* Fix possible storage options in config template.
* Remove useless checks in u2f registration endpoints.
* Add default redirection url in config of duo suite.
* Fix log line in response handler of 2FA methods.
* Fix integration tests.
Co-authored-by: Amir Zarrinkafsh <nightah@me.com>
- Adjust AUTH LOGIN functionality to be closer to AUTH PLAIN
- Removed: secure (notifier smtp conf) boolean string
- Added: disable_verify_cert (notifier smtp conf) boolean
- disables X509 validation of certificates
- Added: disable_require_tls (notifier smtp conf) boolean
- allows emails to be sent over plain text (for non-authenticated only)
- Added: trusted_cert (notifier smtp conf) string (path)
- allows specifying the path of a PEM format cert to add to trusted cert pool
- Make SMTP notifier return errors on connection over plain text
- Make SMTP notifier return errors on TLS connection with invalid certs
- Implemented various debug logging for the SMTP notifier
- Implemented explicit SMTP closes on errors (previously left con open)
- Split SMTPNotifier Send func to seperate funcs for:
- writing future test suites and startup checks more easily
- organization and readability
- Add details of changes to docs/security.yml
- Adjust config.yml's (template and test) for the changes
Providing a GA tracking ID allows administrators to analyze
how the portal is used by their users in large environments,
i.e., with many users.
This will make even more sense when we have users and admins
management interfaces.
The enclosing parenthesis are mandatory with the Go LDAP driver.
In the near future a check will be done at configuration validation before Authelia even starts.
Amir Zarrinkafsh
James Elliott
ZMiguel Valdiviesso
Clément Michaud
Dustin Sweigart
Sohalt